Brandt Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Induction hob zone will not heat and E01 appears on the display when a pan is placed.
Pan Detection / Cookware Recognition Fault
E02
Induction cooktop zone shuts down shortly after starting and displays E02.
Overheating Protection / Thermal Sensor Trip
E03
Induction hob displays E03 and refuses to start any cooking zone.
Supply Voltage Out of Range / Power Input Fault
E04
Induction zone does not heat and E04 appears when trying to increase power.
IGBT / Power Module Overcurrent Fault
E05
Induction cooktop shows E05 and beeps; zones cannot be activated.
Touch Control Panel / Keypad Fault
E06
Induction hob displays E06 and shuts down one or more zones.
Temperature Sensor (NTC) Fault
E07
Induction cooktop shows E07 and does not respond to touch commands.
Control Board Communication Error
E08
Induction hob displays E08 and one or more zones are disabled.
Internal Fan / Cooling System Fault
E09
Induction cooktop shows E09 and all zones are locked out.
Permanent Hardware Fault / Power Module Failure
E10
Induction hob displays E10 and beeps continuously when powered on.
Configuration / Calibration Error
F01
Electric oven in Brandt range shows F01 and will not heat.
Oven Temperature Sensor (Probe) Fault
F02
Brandt electric oven displays F02 and overheats or does not regulate temperature correctly.
Oven Temperature Regulation / Sensor Range Error
F03
Brandt oven shows F03 and will not start a cooking cycle.
Door Lock / Door Switch Fault (Pyrolytic Models)
F04
Brandt oven displays F04 and the fan or heating elements do not operate.
Oven Fan / Air Circulation Fault
F05
Brandt oven shows F05 and trips the breaker or does not heat.
Heating Element Short / Open Circuit
F06
Brandt oven displays F06 and the display or controls behave erratically.
Oven Control Board / User Interface Fault
F07
Brandt oven shows F07 and the cooling fan runs continuously or not at all.
Cooling Fan / Overheat Protection Fault
F08
Brandt oven displays F08 and will not start pyrolytic self-cleaning.
Pyrolytic Cycle Safety Fault
F09
Brandt oven shows F09 and the clock/timer does not function correctly.
Timer / Clock Circuit Fault
F10
Brandt oven displays F10 and heating stops during operation.
Overtemperature / Safety Cut-Out Fault
Symptom
Brandt cooktop control knobs are hard to turn, loose, or do not stop at correct positions.
Mechanical Knob / Valve or Switch Wear
Symptom
Brandt cooktop or range trips the household breaker when a specific burner or zone is turned on.
Short Circuit in Heating Circuit
Symptom
Brandt gas oven in a range will not stay lit or heats very slowly.
Gas Oven Burner / Thermostat Fault
Symptom
Brandt induction cooktop makes loud buzzing or humming noises, especially at high power.
Induction Acoustic Noise / Coil Vibration
Symptom
Brandt induction or ceramic cooktop controls are locked; a key symbol or lock indicator is lit and zones cannot be activated.
Child Lock / Control Lock Activated
Symptom
Brandt oven does not heat in any mode (bake, grill, fan) though the display and light work.
No Heat / Common Supply Fault to Elements
Symptom
Brandt oven door does not close properly or has a gap, causing heat loss.
Door Alignment / Hinge or Seal Fault
Symptom
Brandt oven fan is very noisy, rattling, or scraping during operation.
Convection Fan Bearing Wear / Obstruction
Symptom
Brandt oven heats but temperature is inaccurate; food undercooked or overcooked compared to set temperature.
Oven Temperature Calibration / Sensor Drift
Symptom
Brandt oven interior light does not work, but the oven heats normally.
Oven Lamp Circuit Failure
Symptom
Brandt range or cooktop glass surface is cracked or shattered.
Ceramic / Glass Top Structural Damage
Symptom
Electric ceramic or radiant cooktop zone does not heat at all on a Brandt range or hob.
Radiant Heating Element Open Circuit
Symptom
Electric ceramic zone on a Brandt cooktop heats only on maximum or does not regulate temperature properly.
Energy Regulator / Infinite Switch Failure
Symptom
Gas burner flame goes out when knob is released, especially on low setting, on a Brandt gas cooktop or range.
Flame Supervision Device (Thermocouple) Failure
Symptom
Gas burner ignites but the flame is weak, yellow, or uneven on a Brandt gas cooktop.
Improper Combustion / Burner Air–Gas Mixture Fault
Symptom
Gas burner keeps clicking (sparking) even after the flame is lit on a Brandt gas cooktop.
Continuous Ignition / Stuck Ignition Switch
Symptom
Gas burner will not ignite; clicking sound may be present but no flame appears on a Brandt gas cooktop or gas range.
Gas Ignition Failure
Symptom
Induction cooktop on Brandt range does not power on at all; no lights or display.
No Power / Main Supply Fault
Symptom
Induction cooktop zones on a Brandt hob cut out intermittently or reduce power when multiple zones are used.
Power Management / Overload Limitation
Symptom
Strong gas smell around a Brandt gas cooktop or range, even when burners are off.
Gas Leak / Seal Failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Induction hob zone will not heat and E01 appears on the display when a pan is placed.
|
Pan Detection / Cookware Recognition Fault | View Details |
| E02 |
Induction cooktop zone shuts down shortly after starting and displays E02.
|
Overheating Protection / Thermal Sensor Trip | View Details |
| E03 |
Induction hob displays E03 and refuses to start any cooking zone.
|
Supply Voltage Out of Range / Power Input Fault | View Details |
| E04 |
Induction zone does not heat and E04 appears when trying to increase power.
|
IGBT / Power Module Overcurrent Fault | View Details |
| E05 |
Induction cooktop shows E05 and beeps; zones cannot be activated.
|
Touch Control Panel / Keypad Fault | View Details |
| E06 |
Induction hob displays E06 and shuts down one or more zones.
|
Temperature Sensor (NTC) Fault | View Details |
| E07 |
Induction cooktop shows E07 and does not respond to touch commands.
|
Control Board Communication Error | View Details |
| E08 |
Induction hob displays E08 and one or more zones are disabled.
|
Internal Fan / Cooling System Fault | View Details |
| E09 |
Induction cooktop shows E09 and all zones are locked out.
|
Permanent Hardware Fault / Power Module Failure | View Details |
| E10 |
Induction hob displays E10 and beeps continuously when powered on.
|
Configuration / Calibration Error | View Details |
| F01 |
Electric oven in Brandt range shows F01 and will not heat.
|
Oven Temperature Sensor (Probe) Fault | View Details |
| F02 |
Brandt electric oven displays F02 and overheats or does not regulate temperature correctly.
|
Oven Temperature Regulation / Sensor Range Error | View Details |
| F03 |
Brandt oven shows F03 and will not start a cooking cycle.
|
Door Lock / Door Switch Fault (Pyrolytic Models) | View Details |
| F04 |
Brandt oven displays F04 and the fan or heating elements do not operate.
|
Oven Fan / Air Circulation Fault | View Details |
| F05 |
Brandt oven shows F05 and trips the breaker or does not heat.
|
Heating Element Short / Open Circuit | View Details |
| F06 |
Brandt oven displays F06 and the display or controls behave erratically.
|
Oven Control Board / User Interface Fault | View Details |
| F07 |
Brandt oven shows F07 and the cooling fan runs continuously or not at all.
|
Cooling Fan / Overheat Protection Fault | View Details |
| F08 |
Brandt oven displays F08 and will not start pyrolytic self-cleaning.
|
Pyrolytic Cycle Safety Fault | View Details |
| F09 |
Brandt oven shows F09 and the clock/timer does not function correctly.
|
Timer / Clock Circuit Fault | View Details |
| F10 |
Brandt oven displays F10 and heating stops during operation.
|
Overtemperature / Safety Cut-Out Fault | View Details |
| – |
Brandt cooktop control knobs are hard to turn, loose, or do not stop at correct positions.
|
Mechanical Knob / Valve or Switch Wear | View Details |
| – |
Brandt cooktop or range trips the household breaker when a specific burner or zone is turned on.
|
Short Circuit in Heating Circuit | View Details |
| – |
Brandt gas oven in a range will not stay lit or heats very slowly.
|
Gas Oven Burner / Thermostat Fault | View Details |
| – |
Brandt induction cooktop makes loud buzzing or humming noises, especially at high power.
|
Induction Acoustic Noise / Coil Vibration | View Details |
| – |
Brandt induction or ceramic cooktop controls are locked; a key symbol or lock indicator is lit and zones cannot be activated.
|
Child Lock / Control Lock Activated | View Details |
| – |
Brandt oven does not heat in any mode (bake, grill, fan) though the display and light work.
|
No Heat / Common Supply Fault to Elements | View Details |
| – |
Brandt oven door does not close properly or has a gap, causing heat loss.
|
Door Alignment / Hinge or Seal Fault | View Details |
| – |
Brandt oven fan is very noisy, rattling, or scraping during operation.
|
Convection Fan Bearing Wear / Obstruction | View Details |
| – |
Brandt oven heats but temperature is inaccurate; food undercooked or overcooked compared to set temperature.
|
Oven Temperature Calibration / Sensor Drift | View Details |
| – |
Brandt oven interior light does not work, but the oven heats normally.
|
Oven Lamp Circuit Failure | View Details |
| – |
Brandt range or cooktop glass surface is cracked or shattered.
|
Ceramic / Glass Top Structural Damage | View Details |
| – |
Electric ceramic or radiant cooktop zone does not heat at all on a Brandt range or hob.
|
Radiant Heating Element Open Circuit | View Details |
| – |
Electric ceramic zone on a Brandt cooktop heats only on maximum or does not regulate temperature properly.
|
Energy Regulator / Infinite Switch Failure | View Details |
| – |
Gas burner flame goes out when knob is released, especially on low setting, on a Brandt gas cooktop or range.
|
Flame Supervision Device (Thermocouple) Failure | View Details |
| – |
Gas burner ignites but the flame is weak, yellow, or uneven on a Brandt gas cooktop.
|
Improper Combustion / Burner Air–Gas Mixture Fault | View Details |
| – |
Gas burner keeps clicking (sparking) even after the flame is lit on a Brandt gas cooktop.
|
Continuous Ignition / Stuck Ignition Switch | View Details |
| – |
Gas burner will not ignite; clicking sound may be present but no flame appears on a Brandt gas cooktop or gas range.
|
Gas Ignition Failure | View Details |
| – |
Induction cooktop on Brandt range does not power on at all; no lights or display.
|
No Power / Main Supply Fault | View Details |
| – |
Induction cooktop zones on a Brandt hob cut out intermittently or reduce power when multiple zones are used.
|
Power Management / Overload Limitation | View Details |
| – |
Strong gas smell around a Brandt gas cooktop or range, even when burners are off.
|
Gas Leak / Seal Failure | View Details |
No matching codes found
Advertisements