F07
Brandt
Cooling Fan / Overheat Protection Fault
Brandt oven shows F07 and the cooling fan runs continuously or not at all.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Cooling fan motor failure, Faulty overheat thermostat, Stuck fan relay on control board, Blocked ventilation
How to Fix / Troubleshooting
Safety first: Disconnect power and let the oven cool before accessing internal components.
Steps:
- Check vents: Ensure front and rear ventilation openings are not blocked by cabinetry or objects.
- Test cooling fan: With the oven in a hot cycle (technician only, with power on), verify if the fan receives voltage. If voltage is present but the fan does not run, replace the fan motor.
- Check overheat thermostat: Locate the safety thermostat (usually on the top of the oven cavity). Test for continuity. If open and not resettable, replace it.
- Control board: If the fan runs constantly even when cold, the fan relay on the control board may be stuck closed. Replace the control board.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements