Brandt oven shows F09 and the clock/timer does not function correctly.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Internal failure of clock module, Power surge damage, Faulty control board, Loose low-voltage wiring

Safety first: Disconnect power before removing the control panel.

Steps:

Power reset: Turn off the breaker for 10 minutes to reset the clock module.
Inspect control panel: Remove the front panel and check the clock/timer PCB for burnt components or bulging capacitors.
Check connectors: Ensure all low-voltage connectors are firmly seated.
Replace module: If visible damage is present or F09 persists, replace the clock/timer or full control board assembly as specified by Brandt.

Medium 3/5

Clock / Timer Module

Check Price on Amazon

We may earn a commission from links on this page.