E14
Candy
Half-Bridge or Side Power Module Failure
Induction cooktop shows E14 and one side (left or right group of zones) is inoperative
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failure of one of the twin power modules, Burnt connector between modules, Overcurrent damage on one side
How to Fix / Troubleshooting
Safety first: High voltage and high current are present. Disconnect mains and wait for capacitors to discharge before touching the boards.
- Identify affected side: Note which zones are dead and showing E14. This usually corresponds to one physical power module.
- Inspect interconnects: Remove the base cover and check the harness and connectors between the two power modules and the UI board. Reseat and secure them.
- Check for visible damage: Look for burn marks or cracked components on the affected module. If present, replace that module.
- Replace module as assembly: Candy generally supplies the side power module as a complete unit. Swap the faulty module following the service manual.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Side Power Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements