Electrolux Open Broil Element or Circuit

Broil function does not heat, bake works normally; no error code.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed broil heating element, Burnt wire at broil element, Open high-limit thermostat in broil circuit, Faulty broil relay on EOC

Safety first: Disconnect power before servicing.

Inspect broil element: Look for visible breaks or burn spots on the broil element at the top of the oven.
Test resistance: Remove at least one wire from the element and measure resistance. Replace if open.
Check wiring and thermostats: Inspect wiring to the broil element and test any inline thermostats for continuity.
Control board: If the element and wiring are good, the broil relay on the EOC may be defective and require board replacement.

Medium 3/5

Broil Heating Element

Check Price on Amazon

We may earn a commission from links on this page.