Electrolux Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Cooktop or range display shows E0, burners may not respond.
No Pot Detected / Pan Detection Error (Induction)
E1
Induction cooktop displays E1, affected zone will not heat.
Cookware or Pan Position Error
E2
Induction cooktop displays E2, zone shuts down or will not start.
Cooktop Over-Temperature Protection
E3
Induction cooktop displays E3, zone will not heat.
Supply Voltage Out of Range
E9
Induction cooktop displays E9, entire cooktop may be disabled.
Internal Control Board Fault
F1
Electronic range control (ERC) beeps and displays F1, oven may shut off or not respond to keypad inputs.
Electronic Oven Control (EOC) Keypad or Control Board Failure
F10
Display shows F10, oven may heat uncontrollably or shut down with an over-temperature alarm.
Runaway Oven Temperature
F11
Display shows F11, continuous beeping, keypad may be unresponsive.
Keypad Shorted or Stuck Key
F12
Display shows F12, oven functions disabled or erratic.
Communication Error Between Touchpad and EOC
F13
Display shows F13, often related to the oven door lock or self-clean cycle.
Door Lock Circuit Error
F14
Display shows F14, oven may not respond to touch inputs.
Touchpad Configuration or Addressing Error
F15
Display shows F15, oven may not start or may shut down unexpectedly.
EOC Internal Fault
F2
Oven displays F2 and may shut off during a bake or broil cycle, often associated with excessive temperature.
Oven Over-Temperature Condition
F20
Display shows F20, oven may not heat or may shut off shortly after starting.
Oven Temperature Calibration or Sensor Range Error
F3
Display shows F3, oven may not heat or may shut down shortly after starting.
Oven Temperature Sensor Circuit Open
F30
Display shows F30, oven will not heat or shuts down.
Oven Temperature Sensor Open Circuit
F31
Display shows F31, oven may not heat correctly.
Oven Temperature Sensor Short Circuit
F4
Display shows F4, oven may not heat correctly or may shut off unexpectedly.
Oven Temperature Sensor Circuit Shorted
F40
Display shows F40, oven may not start or may shut down.
Cooktop Lockout or Communication Error
F41
Display shows F41, oven may not respond to commands.
Oven Control to Motorized Components Communication Error
F5
Control displays F5, oven functions may be disabled or intermittent.
Control Board or Relay Failure
F60
Induction cooktop or range displays F60, some or all induction zones do not heat.
Induction Power Board Over-Temperature or Fault
F61
Induction cooktop displays F61, one or more zones inoperative.
Induction Generator Module Fault
F62
Induction cooktop displays F62, often affecting multiple zones.
Induction Control Communication Error
F7
Display shows F7, often accompanied by unresponsive or erratic keypad behavior.
Keypad Stuck or Shorted
F8
Display shows F8, oven may not start or may shut down during operation.
Cooling Fan or Over-Temperature Protection Fault
F9
Display shows F9, oven door may remain locked or will not lock/unlock properly.
Oven Door Lock Circuit Failure
Symptom
Broil function does not heat, bake works normally; no error code.
Open Broil Element or Circuit
Symptom
Control panel buttons or knobs are unresponsive; display may be on.
User Interface Failure or Control Lock Active
Symptom
Control panel or knobs become excessively hot to the touch during oven use.
Improper Cooling or Venting
Symptom
Cooktop glass is cracked or shattered.
Ceramic Glass Top Damage
Symptom
Electric surface element (coil or radiant) does not heat; indicator light may still come on.
Open Surface Element or Infinite Switch Failure
Symptom
Excessive smoke or burning smell from oven during normal baking (not first use or self-clean).
Food or Grease Buildup / Overheating
Symptom
Gas oven will not ignite, you hear clicking but no flame; no error code.
Ignition Failure – Gas Oven
Symptom
Gas surface burner ignites but flame is uneven, yellow, or noisy.
Improper Gas-Air Mixture or Burner Contamination
Symptom
Gas surface burner will not ignite; you hear clicking but no flame.
Surface Burner Ignition Failure
Symptom
Induction burner clicks but does not heat, other zones work; no code or only pan error.
Single Induction Zone Failure
Symptom
Oven does not heat at all on bake, broil may or may not work; no error code displayed.
Open Bake Element or Circuit
Symptom
Oven door will not close fully or pops open slightly during baking.
Door Hinge or Latch Misalignment
Symptom
Oven door will not unlock after self-clean cycle; no error code displayed.
Door Lock Mechanism Stuck
Symptom
Oven fan runs continuously even when oven is off and cool.
Stuck Cooling Fan Relay or Faulty Temperature Sensor
Symptom
Oven light does not work, but oven heats normally.
Oven Cavity Light Circuit Failure
Symptom
Oven or cooktop makes loud popping, banging, or metallic noises during heating or cooling.
Thermal Expansion Noise
Symptom
Oven takes excessively long to preheat or never reaches set temperature.
Insufficient Heating / Partial Element Failure
Symptom
Oven temperature is consistently too hot or too cold compared to the set temperature; food overcooks or undercooks.
Oven Temperature Calibration Error
Symptom
Range display is completely dead; no lights or response.
No Power to Control
Symptom
Range or cooktop trips the circuit breaker during use.
Electrical Short or Overcurrent
Symptom
Strong gas smell around gas cooktop or range, especially when burners are off.
Gas Leak at Cooktop or Manifold
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Cooktop or range display shows E0, burners may not respond.
|
No Pot Detected / Pan Detection Error (Induction) | View Details |
| E1 |
Induction cooktop displays E1, affected zone will not heat.
|
Cookware or Pan Position Error | View Details |
| E2 |
Induction cooktop displays E2, zone shuts down or will not start.
|
Cooktop Over-Temperature Protection | View Details |
| E3 |
Induction cooktop displays E3, zone will not heat.
|
Supply Voltage Out of Range | View Details |
| E9 |
Induction cooktop displays E9, entire cooktop may be disabled.
|
Internal Control Board Fault | View Details |
| F1 |
Electronic range control (ERC) beeps and displays F1, oven may shut off or not respond to keypad inputs.
|
Electronic Oven Control (EOC) Keypad or Control Board Failure | View Details |
| F10 |
Display shows F10, oven may heat uncontrollably or shut down with an over-temperature alarm.
|
Runaway Oven Temperature | View Details |
| F11 |
Display shows F11, continuous beeping, keypad may be unresponsive.
|
Keypad Shorted or Stuck Key | View Details |
| F12 |
Display shows F12, oven functions disabled or erratic.
|
Communication Error Between Touchpad and EOC | View Details |
| F13 |
Display shows F13, often related to the oven door lock or self-clean cycle.
|
Door Lock Circuit Error | View Details |
| F14 |
Display shows F14, oven may not respond to touch inputs.
|
Touchpad Configuration or Addressing Error | View Details |
| F15 |
Display shows F15, oven may not start or may shut down unexpectedly.
|
EOC Internal Fault | View Details |
| F2 |
Oven displays F2 and may shut off during a bake or broil cycle, often associated with excessive temperature.
|
Oven Over-Temperature Condition | View Details |
| F20 |
Display shows F20, oven may not heat or may shut off shortly after starting.
|
Oven Temperature Calibration or Sensor Range Error | View Details |
| F3 |
Display shows F3, oven may not heat or may shut down shortly after starting.
|
Oven Temperature Sensor Circuit Open | View Details |
| F30 |
Display shows F30, oven will not heat or shuts down.
|
Oven Temperature Sensor Open Circuit | View Details |
| F31 |
Display shows F31, oven may not heat correctly.
|
Oven Temperature Sensor Short Circuit | View Details |
| F4 |
Display shows F4, oven may not heat correctly or may shut off unexpectedly.
|
Oven Temperature Sensor Circuit Shorted | View Details |
| F40 |
Display shows F40, oven may not start or may shut down.
|
Cooktop Lockout or Communication Error | View Details |
| F41 |
Display shows F41, oven may not respond to commands.
|
Oven Control to Motorized Components Communication Error | View Details |
| F5 |
Control displays F5, oven functions may be disabled or intermittent.
|
Control Board or Relay Failure | View Details |
| F60 |
Induction cooktop or range displays F60, some or all induction zones do not heat.
|
Induction Power Board Over-Temperature or Fault | View Details |
| F61 |
Induction cooktop displays F61, one or more zones inoperative.
|
Induction Generator Module Fault | View Details |
| F62 |
Induction cooktop displays F62, often affecting multiple zones.
|
Induction Control Communication Error | View Details |
| F7 |
Display shows F7, often accompanied by unresponsive or erratic keypad behavior.
|
Keypad Stuck or Shorted | View Details |
| F8 |
Display shows F8, oven may not start or may shut down during operation.
|
Cooling Fan or Over-Temperature Protection Fault | View Details |
| F9 |
Display shows F9, oven door may remain locked or will not lock/unlock properly.
|
Oven Door Lock Circuit Failure | View Details |
| – |
Broil function does not heat, bake works normally; no error code.
|
Open Broil Element or Circuit | View Details |
| – |
Control panel buttons or knobs are unresponsive; display may be on.
|
User Interface Failure or Control Lock Active | View Details |
| – |
Control panel or knobs become excessively hot to the touch during oven use.
|
Improper Cooling or Venting | View Details |
| – |
Cooktop glass is cracked or shattered.
|
Ceramic Glass Top Damage | View Details |
| – |
Electric surface element (coil or radiant) does not heat; indicator light may still come on.
|
Open Surface Element or Infinite Switch Failure | View Details |
| – |
Excessive smoke or burning smell from oven during normal baking (not first use or self-clean).
|
Food or Grease Buildup / Overheating | View Details |
| – |
Gas oven will not ignite, you hear clicking but no flame; no error code.
|
Ignition Failure – Gas Oven | View Details |
| – |
Gas surface burner ignites but flame is uneven, yellow, or noisy.
|
Improper Gas-Air Mixture or Burner Contamination | View Details |
| – |
Gas surface burner will not ignite; you hear clicking but no flame.
|
Surface Burner Ignition Failure | View Details |
| – |
Induction burner clicks but does not heat, other zones work; no code or only pan error.
|
Single Induction Zone Failure | View Details |
| – |
Oven does not heat at all on bake, broil may or may not work; no error code displayed.
|
Open Bake Element or Circuit | View Details |
| – |
Oven door will not close fully or pops open slightly during baking.
|
Door Hinge or Latch Misalignment | View Details |
| – |
Oven door will not unlock after self-clean cycle; no error code displayed.
|
Door Lock Mechanism Stuck | View Details |
| – |
Oven fan runs continuously even when oven is off and cool.
|
Stuck Cooling Fan Relay or Faulty Temperature Sensor | View Details |
| – |
Oven light does not work, but oven heats normally.
|
Oven Cavity Light Circuit Failure | View Details |
| – |
Oven or cooktop makes loud popping, banging, or metallic noises during heating or cooling.
|
Thermal Expansion Noise | View Details |
| – |
Oven takes excessively long to preheat or never reaches set temperature.
|
Insufficient Heating / Partial Element Failure | View Details |
| – |
Oven temperature is consistently too hot or too cold compared to the set temperature; food overcooks or undercooks.
|
Oven Temperature Calibration Error | View Details |
| – |
Range display is completely dead; no lights or response.
|
No Power to Control | View Details |
| – |
Range or cooktop trips the circuit breaker during use.
|
Electrical Short or Overcurrent | View Details |
| – |
Strong gas smell around gas cooktop or range, especially when burners are off.
|
Gas Leak at Cooktop or Manifold | View Details |
No matching codes found
Advertisements