Electrolux
No Power to Control
Range display is completely dead; no lights or response.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped house breaker, Blown internal fuse, Loose power cord or terminal block connection, Failed power supply on control board
How to Fix / Troubleshooting
Safety first: Turn off the breaker before accessing the rear of the range.
- Check breaker: Verify the range breaker is not tripped. Reset if necessary.
- Inspect power cord and terminal block: Remove the rear cover and check for burnt wires or loose screws at the terminal block.
- Internal fuse: Some Electrolux ranges have an internal line fuse on the control board. Test and replace with the exact type if blown, but investigate the cause of the failure.
- Control board: If power is present at the board but the display is dead, the control board's power supply is likely failed and the board must be replaced.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Electronic Oven Control Board (EOC)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements