F14
Electrolux
Touchpad Configuration or Addressing Error
Display shows F14, oven may not respond to touch inputs.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Incorrect or incompatible touchpad installed, Corrupted EOC configuration, Failed touch controller IC, Damaged keypad ribbon
How to Fix / Troubleshooting
Safety first: Turn off power before working on the control panel.
- Confirm part numbers: Verify that any recently replaced touchpad or control panel matches the exact Electrolux model and revision.
- Reseat ribbon cable: Remove and reinstall the keypad ribbon cable to ensure a solid connection.
- Control reset: Some models allow a configuration reset via a key sequence (consult service manual). Perform the reset if available.
- Replace incompatible parts: If a non-matching panel was installed, replace it with the correct OEM part. If no parts were changed and F14 persists, the EOC may need replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Touchpad / Control Panel Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements