Grundig Convection (Fan) Element Failure

Grundig oven fan runs but there is little or no heat in fan‑assisted modes.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open fan element, Burned connector at fan element, Faulty relay on control board for fan element, Broken wiring

Safety first: Isolate from mains and allow the oven to cool before removing the inner rear panel.

Visual check: Inspect the circular element around the fan for breaks or burn marks.
Test element: Use a multimeter to check continuity. Replace the element if open.
Check connectors: Ensure the element terminals are tight and not burned.

If the element is good, a technician should test the control board output to the fan element.

Medium 3/5

Convection Fan Heating Element

Check Price on Amazon

We may earn a commission from links on this page.