Grundig Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
d0
Grundig range display shows d0 and oven functions are limited or disabled.
Demo Mode Active
E0
Induction cooktop controls unresponsive, display shows E0 and no zones will heat.
User Interface Lock / Control Panel Lock Active
E1
Induction zone will not heat, display shows E1 when attempting to use a cooking zone.
Pan Detection Failure / Incompatible Cookware
E2
Induction hob stops heating and shows E2 on the display, sometimes after a few minutes of operation.
Induction Zone Overheating / Temperature Sensor Fault
E3
Induction hob shows E3 and refuses to start or shuts down shortly after starting a zone.
Supply Voltage Out of Range / Overvoltage Protection
E4
Induction zone displays E4 and does not heat, or stops heating shortly after switching on.
Induction Coil Overcurrent / Short Circuit Detection
E5
Induction hob shows E5 and shuts down or will not start any zone.
Internal Overtemperature Protection (Electronics)
E6
Induction hob shows E6 on one or more zones and they do not heat.
Communication Error Between Touch Control and Power Module
E7
Induction hob shows E7 on a specific zone, often immediately when turned on.
Induction Coil Temperature Sensor Error
E8
Induction hob displays E8 and zones do not heat properly or shut down.
Internal Power Supply / Low Voltage on Control Electronics
E9
Induction hob shows E9 and will not operate any zones.
Configuration / EEPROM Error on Control Board
F0
Electric oven on a Grundig range shows F0 and will not start a cooking program.
Oven Temperature Sensor (Probe) Open Circuit
F1
Grundig electric oven displays F1 and beeps; oven may not heat or may shut off unexpectedly.
Oven Temperature Sensor Short Circuit / Overtemperature
F2
Grundig oven shows F2 during or after a high‑temperature cycle (e.g. grill or pyrolytic clean) and stops heating.
Oven Overtemperature / Cooling System Fault
F3
Grundig oven shows F3 and will not start or maintain temperature.
Oven Temperature Measurement Error / Sensor Range Fault
F4
Grundig oven shows F4 and does not heat in one or more modes.
Heating Element Circuit Fault
F5
Grundig oven shows F5 and fan‑assisted modes do not heat correctly.
Convection Fan or Fan Element Fault
F6
Grundig oven shows F6 and the display or buttons behave erratically.
User Interface / Keypad Error
F7
Grundig oven shows F7 and some functions are disabled.
Door Lock / Latch System Fault (mainly on pyrolytic models)
F8
Grundig oven shows F8 and will not start a cooking program.
Internal Communication Error (Display to Power Board)
F9
Grundig oven shows F9 and may trip the breaker or refuse to heat.
Power Relay / Triac Fault
Symptom
Continuous clicking from the ignition on a Grundig gas hob even when all burners are off.
Stuck Ignition Switch / Moisture in Ignition System
Symptom
Gas burner ignites but goes out when the knob is released on a Grundig gas hob.
Flame Failure Device / Thermocouple Not Holding
Symptom
Gas burner on Grundig gas hob will not ignite; clicking sound may be present but no flame appears.
Ignition Failure / No Gas at Burner
Symptom
Gas smell around Grundig gas hob, especially when not in use.
Gas Leakage at Connection or Valve
Symptom
Glass ceramic surface of Grundig hob cracked or shattered.
Cooktop Glass Damage
Symptom
Grundig induction hob controls are erratic or unresponsive when the surface is wet or when using certain cookware.
Touch Control Interference
Symptom
Grundig induction hob or electric cooktop trips the household circuit breaker when turned on.
Electrical Short / Earth Leakage
Symptom
Grundig oven does not heat at all in any mode; display and lights work.
No Heat / Main Power to Elements Lost
Symptom
Grundig oven door glass becomes excessively hot to touch during normal baking.
Door Cooling / Insulation Fault
Symptom
Grundig oven door will not close fully; heat escapes and cooking is uneven.
Door Alignment / Hinge or Seal Failure
Symptom
Grundig oven fan is very noisy, rattling, or scraping during operation.
Fan Motor Bearing Wear / Obstruction
Symptom
Grundig oven fan runs but there is little or no heat in fan‑assisted modes.
Convection (Fan) Element Failure
Symptom
Grundig oven interior light does not work, but oven heats normally.
Oven Lamp Failure
Symptom
Grundig oven light and display work, but grill function does not heat.
Grill Element Circuit Failure
Symptom
Grundig oven overheats, burning food even at low temperature settings.
Temperature Regulation Failure
Symptom
Grundig oven produces excessive smoke and burning smell during normal cooking.
Residue Burning / Poor Ventilation
Symptom
Induction hob makes loud buzzing or humming noises, especially at higher power levels.
Induction Coil / Pan Resonance Noise
Symptom
Induction zone on Grundig hob repeatedly cuts out or reduces power when using large pans or high settings.
Power Limitation / Overload Protection
Symptom
Uneven or yellow flame on Grundig gas hob burners.
Incorrect Air–Gas Mixture / Blocked Burner Ports
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| d0 |
Grundig range display shows d0 and oven functions are limited or disabled.
|
Demo Mode Active | View Details |
| E0 |
Induction cooktop controls unresponsive, display shows E0 and no zones will heat.
|
User Interface Lock / Control Panel Lock Active | View Details |
| E1 |
Induction zone will not heat, display shows E1 when attempting to use a cooking zone.
|
Pan Detection Failure / Incompatible Cookware | View Details |
| E2 |
Induction hob stops heating and shows E2 on the display, sometimes after a few minutes of operation.
|
Induction Zone Overheating / Temperature Sensor Fault | View Details |
| E3 |
Induction hob shows E3 and refuses to start or shuts down shortly after starting a zone.
|
Supply Voltage Out of Range / Overvoltage Protection | View Details |
| E4 |
Induction zone displays E4 and does not heat, or stops heating shortly after switching on.
|
Induction Coil Overcurrent / Short Circuit Detection | View Details |
| E5 |
Induction hob shows E5 and shuts down or will not start any zone.
|
Internal Overtemperature Protection (Electronics) | View Details |
| E6 |
Induction hob shows E6 on one or more zones and they do not heat.
|
Communication Error Between Touch Control and Power Module | View Details |
| E7 |
Induction hob shows E7 on a specific zone, often immediately when turned on.
|
Induction Coil Temperature Sensor Error | View Details |
| E8 |
Induction hob displays E8 and zones do not heat properly or shut down.
|
Internal Power Supply / Low Voltage on Control Electronics | View Details |
| E9 |
Induction hob shows E9 and will not operate any zones.
|
Configuration / EEPROM Error on Control Board | View Details |
| F0 |
Electric oven on a Grundig range shows F0 and will not start a cooking program.
|
Oven Temperature Sensor (Probe) Open Circuit | View Details |
| F1 |
Grundig electric oven displays F1 and beeps; oven may not heat or may shut off unexpectedly.
|
Oven Temperature Sensor Short Circuit / Overtemperature | View Details |
| F2 |
Grundig oven shows F2 during or after a high‑temperature cycle (e.g. grill or pyrolytic clean) and stops heating.
|
Oven Overtemperature / Cooling System Fault | View Details |
| F3 |
Grundig oven shows F3 and will not start or maintain temperature.
|
Oven Temperature Measurement Error / Sensor Range Fault | View Details |
| F4 |
Grundig oven shows F4 and does not heat in one or more modes.
|
Heating Element Circuit Fault | View Details |
| F5 |
Grundig oven shows F5 and fan‑assisted modes do not heat correctly.
|
Convection Fan or Fan Element Fault | View Details |
| F6 |
Grundig oven shows F6 and the display or buttons behave erratically.
|
User Interface / Keypad Error | View Details |
| F7 |
Grundig oven shows F7 and some functions are disabled.
|
Door Lock / Latch System Fault (mainly on pyrolytic models) | View Details |
| F8 |
Grundig oven shows F8 and will not start a cooking program.
|
Internal Communication Error (Display to Power Board) | View Details |
| F9 |
Grundig oven shows F9 and may trip the breaker or refuse to heat.
|
Power Relay / Triac Fault | View Details |
| – |
Continuous clicking from the ignition on a Grundig gas hob even when all burners are off.
|
Stuck Ignition Switch / Moisture in Ignition System | View Details |
| – |
Gas burner ignites but goes out when the knob is released on a Grundig gas hob.
|
Flame Failure Device / Thermocouple Not Holding | View Details |
| – |
Gas burner on Grundig gas hob will not ignite; clicking sound may be present but no flame appears.
|
Ignition Failure / No Gas at Burner | View Details |
| – |
Gas smell around Grundig gas hob, especially when not in use.
|
Gas Leakage at Connection or Valve | View Details |
| – |
Glass ceramic surface of Grundig hob cracked or shattered.
|
Cooktop Glass Damage | View Details |
| – |
Grundig induction hob controls are erratic or unresponsive when the surface is wet or when using certain cookware.
|
Touch Control Interference | View Details |
| – |
Grundig induction hob or electric cooktop trips the household circuit breaker when turned on.
|
Electrical Short / Earth Leakage | View Details |
| – |
Grundig oven does not heat at all in any mode; display and lights work.
|
No Heat / Main Power to Elements Lost | View Details |
| – |
Grundig oven door glass becomes excessively hot to touch during normal baking.
|
Door Cooling / Insulation Fault | View Details |
| – |
Grundig oven door will not close fully; heat escapes and cooking is uneven.
|
Door Alignment / Hinge or Seal Failure | View Details |
| – |
Grundig oven fan is very noisy, rattling, or scraping during operation.
|
Fan Motor Bearing Wear / Obstruction | View Details |
| – |
Grundig oven fan runs but there is little or no heat in fan‑assisted modes.
|
Convection (Fan) Element Failure | View Details |
| – |
Grundig oven interior light does not work, but oven heats normally.
|
Oven Lamp Failure | View Details |
| – |
Grundig oven light and display work, but grill function does not heat.
|
Grill Element Circuit Failure | View Details |
| – |
Grundig oven overheats, burning food even at low temperature settings.
|
Temperature Regulation Failure | View Details |
| – |
Grundig oven produces excessive smoke and burning smell during normal cooking.
|
Residue Burning / Poor Ventilation | View Details |
| – |
Induction hob makes loud buzzing or humming noises, especially at higher power levels.
|
Induction Coil / Pan Resonance Noise | View Details |
| – |
Induction zone on Grundig hob repeatedly cuts out or reduces power when using large pans or high settings.
|
Power Limitation / Overload Protection | View Details |
| – |
Uneven or yellow flame on Grundig gas hob burners.
|
Incorrect Air–Gas Mixture / Blocked Burner Ports | View Details |
No matching codes found
Advertisements