Hoover Timer / Power Supply Fault

Digital clock/timer on the range is blank or resets frequently; oven will not start.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed clock/timer PCB, Loose neutral or live connection to timer, Power interruptions, Internal low‑voltage power supply failure

Safety first: Isolate the cooker from the mains before removing the control panel.

Check supply: Ensure the cooker circuit is not shared with heavy loads that may cause voltage dips.
Set clock: Many Hoover ovens will not operate until the clock is set. After a power cut, reset the time according to the manual.
Inspect connections (technician): A technician should check the wiring to the clock/timer module for loose or burnt connectors.
Replace timer: If the display remains dead with correct supply, replace the clock/timer PCB.

Medium 3/5

Clock / Timer PCB

Check Price on Amazon

We may earn a commission from links on this page.