Hoover Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Induction or ceramic hob zone will not heat and E01 flashes on the display when attempting to turn the zone on.
Cooktop Zone Overheat / Pan Detection Fault
E02
Hob beeps and shows E02 shortly after switching on, all zones disabled.
Cooktop Overtemperature Protection Triggered
E03
Induction hob displays E03 and the affected zone will not heat or shuts down shortly after starting.
Cooktop Temperature Sensor / NTC Fault
E04
Hob shows E04 and beeps when trying to use multiple zones or at high power levels.
Supply Voltage Out of Range / Power Board Protection
E05
Induction hob displays E05 and one or more zones are disabled.
Internal Communication Error Between User Interface and Power Module
E06
Hob shows E06 and will not accept touch inputs or only some keys respond.
Touch Control Panel Calibration / Key Fault
E07
Induction hob displays E07 and one specific zone cannot be used.
Induction Coil / IGBT Drive Fault
E08
Hob shows E08 and shuts down when multiple zones are used simultaneously.
Current Limit / Power Management Fault
E09
Induction hob displays E09 and one or more zones cannot be activated.
Fan Speed / Cooling System Fault
E10
Hob shows E10 and all zones are locked out.
Configuration / EEPROM Error
Err
Cooktop or oven display briefly shows “Err” when setting temperature or timer and refuses the input.
Invalid Setting / Control Input Error
F0
Electric oven in the range does not heat and displays F0 or a blank temperature with beeping.
Oven Temperature Sensor (Probe) Fault
F1
Oven display shows F1 and beeps; oven functions may be disabled.
Oven Overtemperature / Sensor Range Error
F2
Oven shows F2 and shuts off during or shortly after a high‑temperature cycle (e.g. grill or pyrolytic clean on some models).
Oven Overheat Safety Cut‑Out
F3
Oven display shows F3 and the oven will not start a heating cycle.
Oven Temperature Sensor Circuit Open
F4
Oven shows F4 and may shut down unexpectedly during use.
Oven Temperature Sensor Circuit Short
F5
Oven display shows F5 and the grill or main oven element does not heat.
Relay Drive / Power Relay Fault
F6
Oven shows F6 and none of the heating functions operate.
Oven Control Board Communication / Internal Fault
F7
Oven display shows F7 and the clock/timer functions erratically; oven may not start.
Keypad / User Interface Fault
F8
Oven shows F8 and the door lock symbol flashes on self‑cleaning models; door may remain locked.
Oven Door Lock / Latch Fault
F9
Oven display shows F9 and the door will not lock for self‑clean or will not unlock after cycle.
Door Lock Position Switch Fault
Symptom
Continuous clicking from igniters even when all gas burner knobs are in the OFF position.
Stuck Ignition Switch / Moisture in Ignition Circuit
Symptom
Control knobs on the range are very stiff or difficult to turn.
Worn or Contaminated Gas Tap / Selector Shaft
Symptom
Cooktop glass is cracked or shattered.
Ceramic / Induction Glass Top Damage
Symptom
Cooktop or range trips the household circuit breaker or RCD when turned on.
Electrical Short or Earth Leakage
Symptom
Digital clock/timer on the range is blank or resets frequently; oven will not start.
Timer / Power Supply Fault
Symptom
Electric ceramic or solid plate on the cooktop does not heat at all.
Open Heating Element or Selector Switch Fault
Symptom
Electric oven in the range does not heat on any function, but the clock and light work.
Main Oven Power Supply / Selector Switch Fault
Symptom
Excessive smoke and burning smell from oven during normal cooking (not first use).
Grease Build‑Up / Spillage on Elements
Symptom
Gas burner clicks but will not light or only lights on one side of the ring.
Poor Gas Flow / Blocked Burner Ports
Symptom
Gas burner ignites but goes out when the knob is released.
Flame Supervision Device (Thermocouple) Failure
Symptom
Gas burner will not ignite; no clicking from igniters when knob is turned to ignition position.
Ignition System Power / Spark Generator Failure
Symptom
Grill does not heat or only one side of a dual grill heats.
Grill Element or Selector Fault
Symptom
Oven door does not close fully or drops down too far; heat escapes around the door.
Door Hinge / Hinge Receiver Wear
Symptom
Oven door glass is excessively hot to touch during normal cooking.
Door Insulation / Inner Glass Seal Fault
Symptom
Oven fan runs but there is little or no heat in fan‑assisted mode.
Fan Oven Element Failure
Symptom
Oven heats but temperature is inaccurate; food undercooked or overcooked compared to set temperature.
Temperature Regulation / Calibration Fault
Symptom
Oven light works but fan does not run in any mode.
Oven Circulation Fan Motor Failure
Symptom
Range cooling fan continues to run for an excessively long time after oven is turned off.
Cooling Fan Control / Thermostat Stuck
Symptom
Strong gas smell around the range or cooktop when burners are off.
Gas Leak in Supply or Manifold
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Induction or ceramic hob zone will not heat and E01 flashes on the display when attempting to turn the zone on.
|
Cooktop Zone Overheat / Pan Detection Fault | View Details |
| E02 |
Hob beeps and shows E02 shortly after switching on, all zones disabled.
|
Cooktop Overtemperature Protection Triggered | View Details |
| E03 |
Induction hob displays E03 and the affected zone will not heat or shuts down shortly after starting.
|
Cooktop Temperature Sensor / NTC Fault | View Details |
| E04 |
Hob shows E04 and beeps when trying to use multiple zones or at high power levels.
|
Supply Voltage Out of Range / Power Board Protection | View Details |
| E05 |
Induction hob displays E05 and one or more zones are disabled.
|
Internal Communication Error Between User Interface and Power Module | View Details |
| E06 |
Hob shows E06 and will not accept touch inputs or only some keys respond.
|
Touch Control Panel Calibration / Key Fault | View Details |
| E07 |
Induction hob displays E07 and one specific zone cannot be used.
|
Induction Coil / IGBT Drive Fault | View Details |
| E08 |
Hob shows E08 and shuts down when multiple zones are used simultaneously.
|
Current Limit / Power Management Fault | View Details |
| E09 |
Induction hob displays E09 and one or more zones cannot be activated.
|
Fan Speed / Cooling System Fault | View Details |
| E10 |
Hob shows E10 and all zones are locked out.
|
Configuration / EEPROM Error | View Details |
| Err |
Cooktop or oven display briefly shows “Err” when setting temperature or timer and refuses the input.
|
Invalid Setting / Control Input Error | View Details |
| F0 |
Electric oven in the range does not heat and displays F0 or a blank temperature with beeping.
|
Oven Temperature Sensor (Probe) Fault | View Details |
| F1 |
Oven display shows F1 and beeps; oven functions may be disabled.
|
Oven Overtemperature / Sensor Range Error | View Details |
| F2 |
Oven shows F2 and shuts off during or shortly after a high‑temperature cycle (e.g. grill or pyrolytic clean on some models).
|
Oven Overheat Safety Cut‑Out | View Details |
| F3 |
Oven display shows F3 and the oven will not start a heating cycle.
|
Oven Temperature Sensor Circuit Open | View Details |
| F4 |
Oven shows F4 and may shut down unexpectedly during use.
|
Oven Temperature Sensor Circuit Short | View Details |
| F5 |
Oven display shows F5 and the grill or main oven element does not heat.
|
Relay Drive / Power Relay Fault | View Details |
| F6 |
Oven shows F6 and none of the heating functions operate.
|
Oven Control Board Communication / Internal Fault | View Details |
| F7 |
Oven display shows F7 and the clock/timer functions erratically; oven may not start.
|
Keypad / User Interface Fault | View Details |
| F8 |
Oven shows F8 and the door lock symbol flashes on self‑cleaning models; door may remain locked.
|
Oven Door Lock / Latch Fault | View Details |
| F9 |
Oven display shows F9 and the door will not lock for self‑clean or will not unlock after cycle.
|
Door Lock Position Switch Fault | View Details |
| – |
Continuous clicking from igniters even when all gas burner knobs are in the OFF position.
|
Stuck Ignition Switch / Moisture in Ignition Circuit | View Details |
| – |
Control knobs on the range are very stiff or difficult to turn.
|
Worn or Contaminated Gas Tap / Selector Shaft | View Details |
| – |
Cooktop glass is cracked or shattered.
|
Ceramic / Induction Glass Top Damage | View Details |
| – |
Cooktop or range trips the household circuit breaker or RCD when turned on.
|
Electrical Short or Earth Leakage | View Details |
| – |
Digital clock/timer on the range is blank or resets frequently; oven will not start.
|
Timer / Power Supply Fault | View Details |
| – |
Electric ceramic or solid plate on the cooktop does not heat at all.
|
Open Heating Element or Selector Switch Fault | View Details |
| – |
Electric oven in the range does not heat on any function, but the clock and light work.
|
Main Oven Power Supply / Selector Switch Fault | View Details |
| – |
Excessive smoke and burning smell from oven during normal cooking (not first use).
|
Grease Build‑Up / Spillage on Elements | View Details |
| – |
Gas burner clicks but will not light or only lights on one side of the ring.
|
Poor Gas Flow / Blocked Burner Ports | View Details |
| – |
Gas burner ignites but goes out when the knob is released.
|
Flame Supervision Device (Thermocouple) Failure | View Details |
| – |
Gas burner will not ignite; no clicking from igniters when knob is turned to ignition position.
|
Ignition System Power / Spark Generator Failure | View Details |
| – |
Grill does not heat or only one side of a dual grill heats.
|
Grill Element or Selector Fault | View Details |
| – |
Oven door does not close fully or drops down too far; heat escapes around the door.
|
Door Hinge / Hinge Receiver Wear | View Details |
| – |
Oven door glass is excessively hot to touch during normal cooking.
|
Door Insulation / Inner Glass Seal Fault | View Details |
| – |
Oven fan runs but there is little or no heat in fan‑assisted mode.
|
Fan Oven Element Failure | View Details |
| – |
Oven heats but temperature is inaccurate; food undercooked or overcooked compared to set temperature.
|
Temperature Regulation / Calibration Fault | View Details |
| – |
Oven light works but fan does not run in any mode.
|
Oven Circulation Fan Motor Failure | View Details |
| – |
Range cooling fan continues to run for an excessively long time after oven is turned off.
|
Cooling Fan Control / Thermostat Stuck | View Details |
| – |
Strong gas smell around the range or cooktop when burners are off.
|
Gas Leak in Supply or Manifold | View Details |
No matching codes found
Advertisements