Hoover
Door Hinge / Hinge Receiver Wear
Oven door does not close fully or drops down too far; heat escapes around the door.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or bent door hinges, Damaged hinge receivers in the oven frame, Loose hinge screws, Overloaded door (heavy trays resting on open door)
How to Fix / Troubleshooting
Safety first: Allow the oven to cool before working on the door.
- Check closure: Close the door and look for gaps around the seal. The door should close firmly against the gasket.
- Inspect hinges: Open the door and check for excessive side‑to‑side play or grinding.
- Remove door: Many Hoover ovens allow the door to be lifted off by opening to the broil stop position and lifting. Refer to the user manual.
- Replace hinges/receivers: Fit new oven door hinges and, if worn, hinge receivers. This is usually a straightforward mechanical repair.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinges
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements