Montpellier
No Power to Control Panel / Blown Internal Fuse
Clock or display on Montpellier range is blank and oven will not operate.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped house breaker, Blown internal fuse on control board, Loose connection at terminal block, Faulty power supply section of control PCB
How to Fix / Troubleshooting
Safety first: Before opening any panels, isolate the cooker at the mains. Internal fuses must be replaced with the correct type and rating.
- Check mains supply: Verify that the cooker switch is on and the circuit breaker has not tripped.
- Test socket or connection: If the range is plugged in, test the socket with another appliance.
- Inspect terminal block (technician): Check for loose or burnt connections where the mains cable enters the cooker.
- Check internal fuse: Some Montpellier models have a small fuse on the control board. Replace only with an identical fuse if blown.
- If fuse blows again: There is likely a short on the control board or wiring; professional diagnosis is required.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Electronic Oven Control (EOC)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements