Montpellier
Montpellier Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Induction hob will not power on, display shows E0 or remains blank when any key is pressed.
User Interface Lock / No Pan Detection
E1
Induction hob beeps and shows E1 when attempting to use a cooking zone.
Pan Detection Error / Incompatible Cookware
E2
Induction hob stops heating and displays E2 on one or more zones.
Induction Zone Overheating Protection
E3
Induction hob shows E3 and will not heat on the affected zone.
Supply Voltage Too High
E4
Induction hob displays E4 on one zone and that zone does not heat.
Supply Voltage Too Low / Power Module Protection
E5
Induction hob shows E5 and shuts down or refuses to start.
Internal Temperature Sensor Fault / Overheat Protection
E6
Induction hob displays E6 and zones are disabled.
Internal Communication Error Between Touch Control and Power Board
E7
Induction hob shows E7 on one or more zones and will not heat.
Induction Coil or IGBT Drive Fault
E8
Induction hob displays E8 and beeps; zones may shut down unexpectedly.
Touch Control Panel Sensor Error
E9
Induction hob shows E9 and will not operate.
Configuration / EEPROM Error
F0
Electric oven in a Montpellier range shows F0 and will not heat.
Oven Temperature Sensor (Probe) Open Circuit
F1
Montpellier electric oven or range displays F1 and beeps; oven functions disabled.
Oven Control Board Keypad Fault
F2
Oven shows F2 during or after cooking and may shut off heating.
Oven Over-Temperature Fault
F3
Oven displays F3 and does not heat correctly.
Oven Temperature Sensor Short Circuit
F4
Oven shows F4 and will not start a cooking cycle.
Oven Door Lock / Latch Fault (Pyrolytic or Locking Models)
F5
Oven or range display shows F5 and beeps; some functions disabled.
Oven Control Board Relay or Triac Fault
F6
Oven shows F6 and may not respond to keypad inputs.
Communication Error Between Display and Main Control
F7
Oven or range shows F7 and may shut down mid-cycle.
Cooling Fan or Overheat Thermostat Fault
F8
Oven display shows F8 and oven will not heat.
Power Supply or Line Frequency Error
F9
Oven shows F9 and may lock the door or disable heating.
Door Lock Circuit Error (Self-Clean Models)
Symptom
Ceramic hob zone on Montpellier range does not heat, but indicator light may still come on.
Radiant Heating Element Failure
Symptom
Clock or display on Montpellier range is blank and oven will not operate.
No Power to Control Panel / Blown Internal Fuse
Symptom
Continuous clicking or sparking from Montpellier gas hob even when all burner knobs are in the OFF position.
Stuck Ignition Switch or Moisture in Ignition System
Symptom
Electric oven in Montpellier range does not heat at all, but the clock and lights work.
No Heat from Oven Elements
Symptom
Excessive condensation or steam escaping from Montpellier oven door and control panel.
Poor Oven Venting or Door Seal Issue
Symptom
Excessive vibration or rattling noise from Montpellier range when oven fan is running.
Oven Fan Imbalance or Loose Mounting
Symptom
Gas burner ignites but goes out when the knob is released on a Montpellier gas hob or range.
Flame Failure Device (Thermocouple) Not Holding
Symptom
Gas burner will not ignite on a Montpellier gas hob or gas section of a dual-fuel range.
Ignition Failure on Gas Burner
Symptom
Gas smell around Montpellier gas hob or range, especially when not in use.
Gas Leak in Hob or Connection
Symptom
Induction or ceramic hob zones on Montpellier range do not respond to touch controls intermittently.
Unresponsive Touch Control Panel
Symptom
Montpellier electric oven overheats and burns food even at low temperature settings.
Oven Thermostat or Sensor Out of Calibration
Symptom
Montpellier induction hob makes loud buzzing or humming noises at certain power levels.
Induction Coil Acoustic Noise / Pan Resonance
Symptom
Montpellier range trips the household circuit breaker when an oven or hob zone is turned on.
Electrical Short or Earth Leakage
Symptom
Oven cooling fan on Montpellier range runs continuously even when the oven is off and cool.
Stuck Cooling Fan Thermostat or Relay
Symptom
Oven door on Montpellier range does not close properly, causing heat loss and uneven cooking.
Door Hinge or Seal Failure
Symptom
Oven fan runs but there is little or no heat in fan-assisted mode.
Fan Oven Element Failure
Symptom
Oven light and fan work, but grill does not heat on Montpellier range.
Grill Element Failure
Symptom
Residual heat indicator on Montpellier ceramic hob stays on even when the zone is cold.
Stuck Residual Heat Sensor or Indicator Circuit Fault
Symptom
Strong burning smell or smoke from Montpellier oven during normal cooking (not first use).
Food or Grease Build-Up / Element Overheating
Symptom
Uneven or yellow flame on Montpellier gas hob burners.
Incorrect Air–Gas Mixture / Burner Contamination
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Induction hob will not power on, display shows E0 or remains blank when any key is pressed.
|
User Interface Lock / No Pan Detection | View Details |
| E1 |
Induction hob beeps and shows E1 when attempting to use a cooking zone.
|
Pan Detection Error / Incompatible Cookware | View Details |
| E2 |
Induction hob stops heating and displays E2 on one or more zones.
|
Induction Zone Overheating Protection | View Details |
| E3 |
Induction hob shows E3 and will not heat on the affected zone.
|
Supply Voltage Too High | View Details |
| E4 |
Induction hob displays E4 on one zone and that zone does not heat.
|
Supply Voltage Too Low / Power Module Protection | View Details |
| E5 |
Induction hob shows E5 and shuts down or refuses to start.
|
Internal Temperature Sensor Fault / Overheat Protection | View Details |
| E6 |
Induction hob displays E6 and zones are disabled.
|
Internal Communication Error Between Touch Control and Power Board | View Details |
| E7 |
Induction hob shows E7 on one or more zones and will not heat.
|
Induction Coil or IGBT Drive Fault | View Details |
| E8 |
Induction hob displays E8 and beeps; zones may shut down unexpectedly.
|
Touch Control Panel Sensor Error | View Details |
| E9 |
Induction hob shows E9 and will not operate.
|
Configuration / EEPROM Error | View Details |
| F0 |
Electric oven in a Montpellier range shows F0 and will not heat.
|
Oven Temperature Sensor (Probe) Open Circuit | View Details |
| F1 |
Montpellier electric oven or range displays F1 and beeps; oven functions disabled.
|
Oven Control Board Keypad Fault | View Details |
| F2 |
Oven shows F2 during or after cooking and may shut off heating.
|
Oven Over-Temperature Fault | View Details |
| F3 |
Oven displays F3 and does not heat correctly.
|
Oven Temperature Sensor Short Circuit | View Details |
| F4 |
Oven shows F4 and will not start a cooking cycle.
|
Oven Door Lock / Latch Fault (Pyrolytic or Locking Models) | View Details |
| F5 |
Oven or range display shows F5 and beeps; some functions disabled.
|
Oven Control Board Relay or Triac Fault | View Details |
| F6 |
Oven shows F6 and may not respond to keypad inputs.
|
Communication Error Between Display and Main Control | View Details |
| F7 |
Oven or range shows F7 and may shut down mid-cycle.
|
Cooling Fan or Overheat Thermostat Fault | View Details |
| F8 |
Oven display shows F8 and oven will not heat.
|
Power Supply or Line Frequency Error | View Details |
| F9 |
Oven shows F9 and may lock the door or disable heating.
|
Door Lock Circuit Error (Self-Clean Models) | View Details |
| – |
Ceramic hob zone on Montpellier range does not heat, but indicator light may still come on.
|
Radiant Heating Element Failure | View Details |
| – |
Clock or display on Montpellier range is blank and oven will not operate.
|
No Power to Control Panel / Blown Internal Fuse | View Details |
| – |
Continuous clicking or sparking from Montpellier gas hob even when all burner knobs are in the OFF position.
|
Stuck Ignition Switch or Moisture in Ignition System | View Details |
| – |
Electric oven in Montpellier range does not heat at all, but the clock and lights work.
|
No Heat from Oven Elements | View Details |
| – |
Excessive condensation or steam escaping from Montpellier oven door and control panel.
|
Poor Oven Venting or Door Seal Issue | View Details |
| – |
Excessive vibration or rattling noise from Montpellier range when oven fan is running.
|
Oven Fan Imbalance or Loose Mounting | View Details |
| – |
Gas burner ignites but goes out when the knob is released on a Montpellier gas hob or range.
|
Flame Failure Device (Thermocouple) Not Holding | View Details |
| – |
Gas burner will not ignite on a Montpellier gas hob or gas section of a dual-fuel range.
|
Ignition Failure on Gas Burner | View Details |
| – |
Gas smell around Montpellier gas hob or range, especially when not in use.
|
Gas Leak in Hob or Connection | View Details |
| – |
Induction or ceramic hob zones on Montpellier range do not respond to touch controls intermittently.
|
Unresponsive Touch Control Panel | View Details |
| – |
Montpellier electric oven overheats and burns food even at low temperature settings.
|
Oven Thermostat or Sensor Out of Calibration | View Details |
| – |
Montpellier induction hob makes loud buzzing or humming noises at certain power levels.
|
Induction Coil Acoustic Noise / Pan Resonance | View Details |
| – |
Montpellier range trips the household circuit breaker when an oven or hob zone is turned on.
|
Electrical Short or Earth Leakage | View Details |
| – |
Oven cooling fan on Montpellier range runs continuously even when the oven is off and cool.
|
Stuck Cooling Fan Thermostat or Relay | View Details |
| – |
Oven door on Montpellier range does not close properly, causing heat loss and uneven cooking.
|
Door Hinge or Seal Failure | View Details |
| – |
Oven fan runs but there is little or no heat in fan-assisted mode.
|
Fan Oven Element Failure | View Details |
| – |
Oven light and fan work, but grill does not heat on Montpellier range.
|
Grill Element Failure | View Details |
| – |
Residual heat indicator on Montpellier ceramic hob stays on even when the zone is cold.
|
Stuck Residual Heat Sensor or Indicator Circuit Fault | View Details |
| – |
Strong burning smell or smoke from Montpellier oven during normal cooking (not first use).
|
Food or Grease Build-Up / Element Overheating | View Details |
| – |
Uneven or yellow flame on Montpellier gas hob burners.
|
Incorrect Air–Gas Mixture / Burner Contamination | View Details |
No matching codes found
Advertisements