Induction hob displays E6 and zones are disabled.

Safety first: Isolate the hob at the mains before inspecting for moisture or damage. Do not remove the glass top unless you are a qualified technician.

• Power reset: Turn off the cooker switch or circuit breaker for 5 minutes, then restore power. This can clear transient communication faults.
• Check for moisture: Look around the hob edges and underneath (if accessible) for signs of water ingress from spills. Allow the hob to dry for several hours if moisture is suspected.
• Avoid using excessive water when cleaning: Use a damp cloth only; do not flood the control area.
• If E6 returns immediately: The wiring harness, touch control PCB, or power module may be defective. Professional diagnosis with access to Montpellier service data is required.