Samsung
Oven Door Alignment or Hinge Failure
Oven door will not close fully or does not seal; heat escapes around the door.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Bent or worn door hinges, Misaligned door, Damaged or compressed door gasket, Obstruction between door and frame
How to Fix / Troubleshooting
Safety first: Ensure the oven is cool before working on the door.
Basic checks:
- Inspect the door gasket around the frame for tears, gaps, or hardened sections; replace if damaged.
- Check for pans, racks, or foil blocking the door from closing.
Hinge inspection:
- Open the door fully and check hinges for bending or looseness.
- On many Samsung models, the door can be lifted off the hinges for inspection (consult the manual). If hinges are bent or do not move smoothly, replace the door hinge assemblies in pairs.
After repair: Verify the door closes evenly and the gasket contacts the frame all around.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinge
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements