Oven door will not unlock after self-clean cycle completes.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Allow the oven to cool completely; this can take several hours after self-clean. Do not force the door open.
Reset:
- Turn OFF power at the breaker for 5 minutes, then restore. Sometimes the lock will reset and retract after power cycling.
If still locked:
- With power OFF, remove the rear panel to access the door lock motor assembly.
- Inspect the lock rod and motor for obvious jams or damage.
- Some models allow manual retraction of the lock rod; gently move it to unlock the door.
Permanent fix: If the lock motor or switch is defective, replace the door lock assembly. This repair is moderately complex and may be best handled by a technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.