Zanussi Door Hinge / Seal Misalignment

Oven door does not close properly, leaving a gap and causing heat to escape.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn or bent door hinges, deformed door seal, hinge receiver damage in cabinet, door glass mis-seated

Safety first: Allow the oven to cool before working on the door.

Inspect hinges: Open the door and check for sagging or play in the hinges. If the door drops or does not align with the cabinet, hinges may need replacement.
Check seal: Inspect the door gasket for flat spots, tears, or missing sections. Replace if damaged.
Adjust or replace hinges: Remove the door according to the user manual (usually by opening to a specific angle and lifting off). Replace hinges in pairs with genuine Zanussi parts.

Medium 3/5

Oven Door Hinge Set

Check Price on Amazon

We may earn a commission from links on this page.