Zanussi Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Electric oven will not heat, display shows E01 shortly after a heating command is selected.
Oven Temperature Sensor Circuit Fault
E02
Electric oven overheats, burns food quickly, or shows E02 during or after a cooking cycle.
Oven Overtemperature / Sensor Range Error
E03
Electric oven does not heat and displays E03 shortly after start, fan may run but no heat.
Heating Element Circuit Fault
E04
Induction or ceramic hob zone will not heat and the display shows E04 when that zone is selected.
Hob Power Module Overcurrent / Short Circuit
E05
Induction hob zones shut down during cooking and display E05, often after running at high power for some time.
Hob Overtemperature Protection Activated
E06
Induction hob does not detect pans on one or more zones and shows E06 when trying to start.
Pan Detection / Induction Coil Feedback Fault
E07
Induction or ceramic hob controls are unresponsive or lock symbol appears with E07 on the display.
Control Panel / Touchpad Lock or Communication Error
E08
Induction hob displays E08 and will not start any zones, often after a power cut or surge.
Supply Voltage / Phase Error
E09
Induction hob shows E09 on one or more zones and they shut down shortly after starting.
IGBT / Power Transistor Overtemperature or Failure
E10
Induction hob displays E10 and will not operate, often accompanied by a continuous beep.
Touch Control Panel Fault / Stuck Key
F1
Electric oven display shows F1 and beeps; oven may not start or may shut down.
Oven Control Board Keypad / Interface Error
F2
Electric oven shows F2 and may shut off during use, often when using grill or high temperatures.
Oven Overtemperature / High-Limit Thermostat Trip
F3
Electric oven shows F3 and does not heat correctly, temperature may be erratic.
Oven Temperature Sensor Open Circuit
F4
Electric oven shows F4 and may overheat or underheat.
Oven Temperature Sensor Short Circuit
F5
Electric oven shows F5 and will not start a cooking cycle.
Door Lock / Latch Fault (Pyrolytic Models)
F6
Electric oven shows F6 and the internal light or fan may not operate correctly.
Oven Fan Motor / Fan Feedback Fault
F7
Electric oven shows F7 and may not respond to temperature changes or function selection.
Function Selector Switch / Control Communication Fault
F8
Electric oven shows F8 and the display may be blank or flickering.
Low Voltage / Power Supply Fault to Control Board
F9
Electric oven shows F9 and may trip the household circuit breaker when heating is attempted.
Earth Leakage / Short to Ground
Symptom
Cooktop control knobs are stiff, hard to turn, or seized.
Valve Spindle / Knob Mechanical Wear
Symptom
Cooktop glass-ceramic surface is cracked or shattered.
Glass Top Mechanical Damage
Symptom
Cooktop or range frame gives a mild electric tingle when touched.
Protective Earth / Leakage Fault
Symptom
Electric oven does not heat at all; display and light work, but no heat on any function and no error code.
Main Power Feed / Selector or Thermostat Failure
Symptom
Electric oven heats but temperature is significantly too high or too low compared to the set temperature.
Temperature Regulation / Calibration Fault
Symptom
Gas burner clicks and sparks but will not light, or lights and goes out when knob is released.
Gas Supply / Flame Supervision Device Fault
Symptom
Gas burner flame is yellow, noisy, or lifting off the burner instead of a steady blue flame.
Incorrect Combustion / Air-Gas Mixture Fault
Symptom
Gas burner will not ignite; no clicking sound from igniters when knob is turned to ignition position.
Ignition System Power / Spark Generator Failure
Symptom
Gas oven will not heat, oven burner does not ignite, but hob burners work normally.
Gas Oven Ignition / Safety Valve Fault
Symptom
Induction hob makes loud buzzing or humming noises at certain power levels.
Induction Coil / Cookware Vibration
Symptom
Induction hob zones shut off automatically after a few seconds when using small pans.
Pan Size Detection / Safety Cut-Out
Symptom
Oven door does not close properly, leaving a gap and causing heat to escape.
Door Hinge / Seal Misalignment
Symptom
Oven door glass is fogging up or moisture is trapped between inner and outer glass panes.
Door Glass Seal / Ventilation Issue
Symptom
Oven emits a strong burning smell or smoke during normal cooking (not first use).
Residue Burning / Electrical Overheating
Symptom
Oven fan is very noisy, rattling, or scraping during operation.
Convection Fan Bearing Wear / Obstruction
Symptom
Oven interior light and fan work, but elements cycle on and off very rapidly, causing poor cooking performance.
Control Relay Chatter / Power Supply Instability
Symptom
Oven light does not work, but oven heats normally.
Oven Lamp / Lamp Holder Failure
Symptom
Oven trips the RCD or circuit breaker when the grill is used, but other functions work.
Grill Element Insulation Breakdown
Symptom
Timer or clock display is blank or flickering, but oven still heats when manually controlled.
Timer / Display Module Power Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Electric oven will not heat, display shows E01 shortly after a heating command is selected.
|
Oven Temperature Sensor Circuit Fault | View Details |
| E02 |
Electric oven overheats, burns food quickly, or shows E02 during or after a cooking cycle.
|
Oven Overtemperature / Sensor Range Error | View Details |
| E03 |
Electric oven does not heat and displays E03 shortly after start, fan may run but no heat.
|
Heating Element Circuit Fault | View Details |
| E04 |
Induction or ceramic hob zone will not heat and the display shows E04 when that zone is selected.
|
Hob Power Module Overcurrent / Short Circuit | View Details |
| E05 |
Induction hob zones shut down during cooking and display E05, often after running at high power for some time.
|
Hob Overtemperature Protection Activated | View Details |
| E06 |
Induction hob does not detect pans on one or more zones and shows E06 when trying to start.
|
Pan Detection / Induction Coil Feedback Fault | View Details |
| E07 |
Induction or ceramic hob controls are unresponsive or lock symbol appears with E07 on the display.
|
Control Panel / Touchpad Lock or Communication Error | View Details |
| E08 |
Induction hob displays E08 and will not start any zones, often after a power cut or surge.
|
Supply Voltage / Phase Error | View Details |
| E09 |
Induction hob shows E09 on one or more zones and they shut down shortly after starting.
|
IGBT / Power Transistor Overtemperature or Failure | View Details |
| E10 |
Induction hob displays E10 and will not operate, often accompanied by a continuous beep.
|
Touch Control Panel Fault / Stuck Key | View Details |
| F1 |
Electric oven display shows F1 and beeps; oven may not start or may shut down.
|
Oven Control Board Keypad / Interface Error | View Details |
| F2 |
Electric oven shows F2 and may shut off during use, often when using grill or high temperatures.
|
Oven Overtemperature / High-Limit Thermostat Trip | View Details |
| F3 |
Electric oven shows F3 and does not heat correctly, temperature may be erratic.
|
Oven Temperature Sensor Open Circuit | View Details |
| F4 |
Electric oven shows F4 and may overheat or underheat.
|
Oven Temperature Sensor Short Circuit | View Details |
| F5 |
Electric oven shows F5 and will not start a cooking cycle.
|
Door Lock / Latch Fault (Pyrolytic Models) | View Details |
| F6 |
Electric oven shows F6 and the internal light or fan may not operate correctly.
|
Oven Fan Motor / Fan Feedback Fault | View Details |
| F7 |
Electric oven shows F7 and may not respond to temperature changes or function selection.
|
Function Selector Switch / Control Communication Fault | View Details |
| F8 |
Electric oven shows F8 and the display may be blank or flickering.
|
Low Voltage / Power Supply Fault to Control Board | View Details |
| F9 |
Electric oven shows F9 and may trip the household circuit breaker when heating is attempted.
|
Earth Leakage / Short to Ground | View Details |
| – |
Cooktop control knobs are stiff, hard to turn, or seized.
|
Valve Spindle / Knob Mechanical Wear | View Details |
| – |
Cooktop glass-ceramic surface is cracked or shattered.
|
Glass Top Mechanical Damage | View Details |
| – |
Cooktop or range frame gives a mild electric tingle when touched.
|
Protective Earth / Leakage Fault | View Details |
| – |
Electric oven does not heat at all; display and light work, but no heat on any function and no error code.
|
Main Power Feed / Selector or Thermostat Failure | View Details |
| – |
Electric oven heats but temperature is significantly too high or too low compared to the set temperature.
|
Temperature Regulation / Calibration Fault | View Details |
| – |
Gas burner clicks and sparks but will not light, or lights and goes out when knob is released.
|
Gas Supply / Flame Supervision Device Fault | View Details |
| – |
Gas burner flame is yellow, noisy, or lifting off the burner instead of a steady blue flame.
|
Incorrect Combustion / Air-Gas Mixture Fault | View Details |
| – |
Gas burner will not ignite; no clicking sound from igniters when knob is turned to ignition position.
|
Ignition System Power / Spark Generator Failure | View Details |
| – |
Gas oven will not heat, oven burner does not ignite, but hob burners work normally.
|
Gas Oven Ignition / Safety Valve Fault | View Details |
| – |
Induction hob makes loud buzzing or humming noises at certain power levels.
|
Induction Coil / Cookware Vibration | View Details |
| – |
Induction hob zones shut off automatically after a few seconds when using small pans.
|
Pan Size Detection / Safety Cut-Out | View Details |
| – |
Oven door does not close properly, leaving a gap and causing heat to escape.
|
Door Hinge / Seal Misalignment | View Details |
| – |
Oven door glass is fogging up or moisture is trapped between inner and outer glass panes.
|
Door Glass Seal / Ventilation Issue | View Details |
| – |
Oven emits a strong burning smell or smoke during normal cooking (not first use).
|
Residue Burning / Electrical Overheating | View Details |
| – |
Oven fan is very noisy, rattling, or scraping during operation.
|
Convection Fan Bearing Wear / Obstruction | View Details |
| – |
Oven interior light and fan work, but elements cycle on and off very rapidly, causing poor cooking performance.
|
Control Relay Chatter / Power Supply Instability | View Details |
| – |
Oven light does not work, but oven heats normally.
|
Oven Lamp / Lamp Holder Failure | View Details |
| – |
Oven trips the RCD or circuit breaker when the grill is used, but other functions work.
|
Grill Element Insulation Breakdown | View Details |
| – |
Timer or clock display is blank or flickering, but oven still heats when manually controlled.
|
Timer / Display Module Power Fault | View Details |
No matching codes found
Advertisements