Zanussi
Timer / Display Module Power Fault
Timer or clock display is blank or flickering, but oven still heats when manually controlled.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed display PCB, loose connector, low-voltage supply fault on control board, worn solder joints
How to Fix / Troubleshooting
Safety first: Isolate the appliance from mains before removing the control panel.
- Check power settings: Some models allow dimming or turning off the display; verify settings in the user manual.
- Inspect connectors: Remove the control panel and check the display module connectors for looseness or corrosion. Reseat firmly.
- Replace display module: If the display remains blank or flickers despite good connections, replace the timer/display PCB.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Timer / Display PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements