Robot vacuum emits a burning smell or very hot air from the exhaust during cleaning.

Safety first: Immediately turn OFF the robot and remove it from the dock. Do not continue using the unit until the cause is identified. Risk of fire if ignored.

• 1. Allow to cool: Let the robot cool for at least 30 minutes in a well-ventilated area.
• 2. Inspect and clean filters and ducts: Remove the dust bin, filters, and check all air passages for blockages. Clean thoroughly.
• 3. Check for visible damage: Look for melted plastic, discoloration, or burnt wiring around the suction motor area (if accessible).
• 4. Test briefly: After cleaning and cooling, run the robot for a few minutes while monitoring smell and temperature.
• 5. If burning smell returns: Stop use immediately. The suction motor assembly or another internal component is likely failing and must be replaced by a qualified technician.