Robot vacuum leaves visible dust and debris on the floor; cleaning performance is poor even though it runs normally.

Safety first: Turn OFF the robot before cleaning components.

• 1. Empty dust bin: Remove and empty the dust bin after every cleaning cycle or when it is half full.
• 2. Clean or replace filters: Tap the primary and HEPA filters to remove dust. Replace filters according to the manual (typically every 2–6 months depending on use).
• 3. Inspect main brush: If bristles are worn down, bent, or missing, replace the main brush with a compatible Amazon Basics brush.
• 4. Check bin seal and gaskets: Inspect the rubber seals around the dust bin and suction inlet. If torn or deformed, replace the bin or gasket to restore suction.
• 5. Verify suction: With the robot running, feel for airflow at the exhaust. Weak airflow after cleaning suggests the suction motor or internal ducts may be partially blocked and need deeper inspection.