Honiture
User Interface / Button or Mode Lock Issue
Robot vacuum powers on but will not start cleaning when the Start button is pressed or when commanded from the app.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Start button membrane switch failed, Child lock or key lock enabled in app, Firmware glitch, Main PCB input circuit fault
How to Fix / Troubleshooting
Safety first: No internal work is needed initially.
- Check app settings: Open the Honiture app and verify that any child lock or key lock feature is disabled.
- Try app control: Attempt to start cleaning from the app. If the robot responds to the app but not the physical button, the Top Control Panel / Button Board may be faulty.
- Reboot robot: Turn the main power switch OFF for 30 seconds, then ON, and try again.
- Advanced repair: Open the top cover to access the button board. Check the ribbon cable connection to the main PCB. Replace the Button / Keypad Board if the physical buttons do not register.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Top Control Panel / Button Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements