Neabot
LED Indicator Failure
Robot vacuum's display LEDs or status lights do not work, but the robot still cleans.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Burned-out LED array, Loose LED board connector, Minor mainboard output failure, Water ingress near control panel
How to Fix / Troubleshooting
Safety first: Turn off the robot and remove it from the dock.
- App status: Use the Neabot app to monitor robot status since LEDs are not reliable.
- Check for moisture: Inspect the top panel for signs of water damage or condensation. Allow the robot to dry in a warm, dry place for 24 hours if moisture is suspected.
- Internal inspection (advanced): If comfortable and out of warranty, open the top cover to check the LED board connector to the mainboard and reseat if loose.
- Board replacement: If LEDs remain nonfunctional, the LED board or mainboard may need replacement.
Warning: Do not continue to use the robot if there is active moisture inside; this can cause short circuits.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
LED Indicator Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements