Error 6
Neato
Left drive wheel stall fault
Neato robot displays 'Error 6: My left wheel is stuck' or similar wheel-specific error.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Debris wrapped around left wheel, Left wheel suspension jammed, Left wheel motor failure, Left wheel encoder sensor fault
How to Fix / Troubleshooting
Safety: Turn the robot OFF before working on the wheel.
- Inspect the left wheel: Flip the robot over. Rotate the left wheel by hand and compress it into the body. It should move freely.
- Clear obstructions: Remove hair, string, or debris from around the wheel hub and axle using tweezers or scissors.
- Check suspension movement: Ensure the wheel can move up and down without sticking. Clean any dirt buildup in the wheel well.
- Test operation: Place the robot on a flat floor and start a cleaning cycle. If the error persists, the left wheel module or encoder may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Left Drive Wheel Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements