Robot vacuum does not turn on at all; no lights or sounds when pressing the power button.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Ensure the dock and power adapter are in good condition and plugged into a safe outlet.
Basic checks:
- Locate and switch the main power switch on the underside to ON.
- Place the robot on the dock and check for any charging indicator lights.
- Leave it on the dock for at least 30–60 minutes, then try powering on again.
Check battery connection:
- If still dead, open the battery compartment and verify the battery connector is firmly seated.
Advanced: If there is still no response, the battery may be completely failed or the mainboard/power button circuit may be defective. Try replacing the battery first; if that does not help, professional mainboard diagnosis is required.
Repair Difficulty
Required Part
We may earn a commission from links on this page.