SilverCrest
Display / LED Indicator Failure
Robot vacuum's display or indicator LEDs do not light, but the robot still operates.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed LED board, Loose display ribbon cable, Burned LED driver on main PCB, Cracked display lens
How to Fix / Troubleshooting
Safety first: Turn off the robot and disconnect from the dock before opening.
- 1. Confirm operation: Use the app or remote to verify that the SilverCrest robot still responds and cleans normally.
- 2. Check brightness settings: Some models allow dimming LEDs; ensure brightness is not set to minimum.
- 3. Inspect connections (advanced): Open the top cover and check the LED/display board ribbon cable connection to the main PCB.
- 4. Replace LED/display board: If the connection is good but no lights appear, replace the SilverCrest LED indicator board or display module.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
SilverCrest LED Indicator Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements