Robot vacuum starts but immediately stops with the dust bin icon, without a specific code

Safety first: Turn OFF the robot before removing the dust bin.

• 1. Reseat dust bin: Remove the bin and reinstall it firmly until it clicks. Ensure no debris is blocking the bin rails.
• 2. Inspect bin latch and tabs: Check that the latch closes securely and that any plastic tabs or magnets used for detection are intact.
• 3. Clean sensor area: Use a dry brush or compressed air to clean the bin sensor area inside the robot.
• 4. Replace bin if damaged: If the bin cannot latch securely or detection tabs are broken, replace the dust bin assembly.

Warning: Do not tape the bin in place or bypass the sensor; the bin must be correctly installed to protect the fan and internal components.