AEG No Power / Main Supply Fault

Washer-dryer does not start at all, no lights or display, appears completely dead.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown mains fuse, Tripped circuit breaker, Faulty power cord, Defective AEG mains filter or power module, Faulty on/off switch

Safety: Ensure your hands are dry when working with plugs and sockets.

Check outlet: Test the wall socket with another appliance to confirm power is present.
Inspect plug and cord: Look for damage, burns, or loose pins. Replace the cord set if damaged.
Check household fuse/breaker: Reset any tripped breaker and replace blown fuses with the correct rating.
Internal checks: If external supply is good, an internal mains filter or power module fault is likely and should be diagnosed by a qualified technician due to live voltage exposure.

Hard 4/5

AEG Mains Filter / Power Module

Check Price on Amazon

We may earn a commission from links on this page.