AEG Drying Condensation / Pump Fault

Washer-dryer stops during drying with water collecting in the drum or poor condensation.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked condenser water path, Faulty dry drain pump, Clogged internal hoses, Faulty dry cycle pressure or level sensor

Safety: Unplug the appliance before service.

Clean condenser and channels: Remove and clean the condenser and any accessible water channels leading to the sump.
Check dry pump: Some AEG washer-dryers use a separate pump for drying condensate. Access and test this pump for blockages or failure.
Inspect hoses: Check small hoses used in the drying system for kinks or blockages and clean them.

Hard 4/5

AEG Condensate Pump

Check Price on Amazon

We may earn a commission from links on this page.