LE
GE Profile
Motor Locked / Overload Error
Washer-dryer combo shows LE and the drum does not rotate; may hum briefly then stop.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Foreign object jammed between drum and tub, Seized drum bearing, Failed drive motor, Broken or jammed drive belt
How to Fix / Troubleshooting
Safety first: Unplug the unit before accessing internal components.
- Check drum movement: Try to rotate the drum by hand. If it is stuck or very stiff, suspect a mechanical jam or bearing issue.
- Inspect for foreign objects: Shine a flashlight through drum holes and around the door gasket to look for trapped items (e.g., bra wires, coins). Remove if visible.
- Access rear drive: Remove the rear panel to inspect the drive belt and pulley. Replace a broken belt and ensure it is properly tensioned.
- Test motor: If the drum turns freely but the motor does not run, test the drive motor for continuity and proper resistance. Replace if defective.
- Seek service for bearing failure: If the drum is seized due to bearing failure, replacing the rear tub assembly is complex and usually requires a professional.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements