GE Profile Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
CL
Washer-dryer combo shows CL and buttons do not respond; unit appears locked.
Child Lock / Control Lock Activated
dE
Washer-dryer combo displays dE and will not start; door symbol may flash.
Door Open / Door Lock Error
E10
Washer-dryer combo shows E10 shortly after starting; no water enters the drum.
No Water Inlet Detected
E11
Washer-dryer combo displays E11 and overfills or shows water level issues; may leak from door.
Water Level Sensor / Pressure Switch Error
E13
Washer-dryer combo shows E13 and may leak internally; water detected in base pan (if equipped with float switch).
Leak Detected / Overflow Protection
E21
Washer-dryer combo displays E21 and takes too long to drain; may leave some water in the drum.
Slow Drain / Partial Blockage
E22
Washer-dryer combo stops mid-cycle and displays E22; may not advance to rinse or spin.
Water Inlet Timeout / Fill Error
E23
Washer-dryer combo displays E23 and will not drain or complete the cycle; water remains in drum.
Drain Pump Failure / Drain Timeout
E24
Washer-dryer combo shows E24 and may stop with water still in the tub; sometimes accompanied by unusual pump noise.
Drain Pump Electrical Fault
E31
Washer-dryer combo shows E31 and will not start or stops shortly after starting the wash cycle.
Door Lock / Door Latch Failure
E32
Washer-dryer combo displays E32 and may not spin properly; speed sensing issues reported.
Motor Tachometer / Speed Sensor Error
E33
Washer-dryer combo shows E33 and may have issues with water level detection during spin or rinse.
Water Level Sensor Calibration Error
E42
Washer-dryer combo displays E42 and the door remains locked at the end of the cycle; unit may not respond to controls.
Door Unlock Failure / Door Lock Circuit Error
E51
Washer-dryer combo displays E51 and may not spin or agitate; motor relay fault indicated.
Motor Relay / Drive Circuit Error
E54
Washer-dryer combo shows E54 and will not spin or tumble; motor does not run.
Motor Drive Error / Motor Control Failure
E57
Washer-dryer combo displays E57 and may trip the breaker or shut down when the motor tries to start.
Motor Overcurrent / Short Circuit
E61
Washer-dryer combo shows E61 and will not heat during the dry cycle; clothes remain wet or take excessively long to dry.
Dryer Heater Circuit Failure
E62
Washer-dryer combo displays E62 and overheats during drying; may shut off early or feel extremely hot to the touch.
Dryer Overheating / Temperature Sensor Error
E63
Washer-dryer combo shows E63 and may stop heating during dry; heater relay fault indicated.
Heater Relay / Heating Circuit Control Error
E71
Washer-dryer combo shows E71 and will not advance properly through wash cycles; water temperature may be incorrect.
Water Temperature Sensor (NTC) Error
E72
Washer-dryer combo displays E72 and may not regulate dryer temperature correctly; clothes may be under-dried or overheated.
Dryer Temperature Sensor (Thermistor) Error
E81
Washer-dryer combo shows E81 and will not start; display and buttons may be unresponsive or partially functional.
User Interface / Control Panel Communication Error
E82
Washer-dryer combo displays E82 and cycles may stop unexpectedly; some functions may not respond.
Main Control Board Error
E90
Washer-dryer combo shows E90 and will not start; may indicate a general communication or configuration fault.
System Communication / Configuration Error
E91
Washer-dryer combo displays E91 and may not communicate between UI and main control; display may be blank or show partial info.
UI to Main Control Communication Failure
H20
Washer-dryer combo displays H20 and takes a long time to fill or does not fill at all.
Low Water Flow / Fill Error
LE
Washer-dryer combo shows LE and the drum does not rotate; may hum briefly then stop.
Motor Locked / Overload Error
OE
Washer-dryer combo shows OE and will not drain; water remains in the drum.
Drain Error / Pump Timeout
PF
Washer-dryer combo displays PF and cycle stops; may occur after a power interruption.
Power Failure / Voltage Interruption
Sud
Washer-dryer combo displays Sud or excessive suds warning; drum may pause and perform extra rinses.
Excessive Suds / Suds Lock
tE
Washer-dryer combo displays tE during a wash or dry cycle; may stop heating or washing.
Temperature Sensor Error (Generic)
UE
Washer-dryer combo displays UE and will not reach full spin speed; drum may repeatedly try to balance the load.
Unbalanced Load / Spin Imbalance Detection
Symptom
Washer-dryer combo buttons are unresponsive or some keys do not work.
User Interface Keypad Failure
Symptom
Washer-dryer combo display is dead; no lights or response when pressing buttons.
No Power / Dead Control
Symptom
Washer-dryer combo does not dry clothes effectively; clothes come out damp after full dry cycle.
Poor Drying Performance
Symptom
Washer-dryer combo door will not unlock at the end of the cycle, but no error code is displayed.
Door Lock Stuck Closed
Symptom
Washer-dryer combo drum does not turn during wash or dry, but you can hear the motor running.
Broken or Slipped Drive Belt
Symptom
Washer-dryer combo emits a burning smell during wash or dry cycles.
Overheating Component or Belt Slippage
Symptom
Washer-dryer combo emits a grinding or rumbling noise, especially at high spin speeds.
Drum Bearing or Spider Arm Failure
Symptom
Washer-dryer combo has a musty or moldy odor inside the drum or around the door.
Biofilm / Mold Growth in Tub and Gasket
Symptom
Washer-dryer combo leaks water from the front door area during wash or rinse cycles.
Door Gasket (Boot) Leak
Symptom
Washer-dryer combo leaks water from the rear or bottom during fill or wash.
Internal Hose or Pump Leak
Symptom
Washer-dryer combo leaves clothes very wet at the end of the cycle; spin seems weak or short.
Poor Spin Extraction
Symptom
Washer-dryer combo makes loud banging or knocking noises during spin.
Out-of-Balance / Suspension Wear
Symptom
Washer-dryer combo produces a high-pitched squeal or screech during spin or tumble.
Drive Belt or Idler Pulley Noise
Symptom
Washer-dryer combo trips the household circuit breaker during operation.
Electrical Short or Overload
Symptom
Washer-dryer combo vibrates excessively and may move or "walk" during spin.
Excessive Vibration / Installation Issue
Symptom
Washer-dryer combo will not start; lights may be on but pressing Start does nothing.
No Start / Control or Door Interlock Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| CL |
Washer-dryer combo shows CL and buttons do not respond; unit appears locked.
|
Child Lock / Control Lock Activated | View Details |
| dE |
Washer-dryer combo displays dE and will not start; door symbol may flash.
|
Door Open / Door Lock Error | View Details |
| E10 |
Washer-dryer combo shows E10 shortly after starting; no water enters the drum.
|
No Water Inlet Detected | View Details |
| E11 |
Washer-dryer combo displays E11 and overfills or shows water level issues; may leak from door.
|
Water Level Sensor / Pressure Switch Error | View Details |
| E13 |
Washer-dryer combo shows E13 and may leak internally; water detected in base pan (if equipped with float switch).
|
Leak Detected / Overflow Protection | View Details |
| E21 |
Washer-dryer combo displays E21 and takes too long to drain; may leave some water in the drum.
|
Slow Drain / Partial Blockage | View Details |
| E22 |
Washer-dryer combo stops mid-cycle and displays E22; may not advance to rinse or spin.
|
Water Inlet Timeout / Fill Error | View Details |
| E23 |
Washer-dryer combo displays E23 and will not drain or complete the cycle; water remains in drum.
|
Drain Pump Failure / Drain Timeout | View Details |
| E24 |
Washer-dryer combo shows E24 and may stop with water still in the tub; sometimes accompanied by unusual pump noise.
|
Drain Pump Electrical Fault | View Details |
| E31 |
Washer-dryer combo shows E31 and will not start or stops shortly after starting the wash cycle.
|
Door Lock / Door Latch Failure | View Details |
| E32 |
Washer-dryer combo displays E32 and may not spin properly; speed sensing issues reported.
|
Motor Tachometer / Speed Sensor Error | View Details |
| E33 |
Washer-dryer combo shows E33 and may have issues with water level detection during spin or rinse.
|
Water Level Sensor Calibration Error | View Details |
| E42 |
Washer-dryer combo displays E42 and the door remains locked at the end of the cycle; unit may not respond to controls.
|
Door Unlock Failure / Door Lock Circuit Error | View Details |
| E51 |
Washer-dryer combo displays E51 and may not spin or agitate; motor relay fault indicated.
|
Motor Relay / Drive Circuit Error | View Details |
| E54 |
Washer-dryer combo shows E54 and will not spin or tumble; motor does not run.
|
Motor Drive Error / Motor Control Failure | View Details |
| E57 |
Washer-dryer combo displays E57 and may trip the breaker or shut down when the motor tries to start.
|
Motor Overcurrent / Short Circuit | View Details |
| E61 |
Washer-dryer combo shows E61 and will not heat during the dry cycle; clothes remain wet or take excessively long to dry.
|
Dryer Heater Circuit Failure | View Details |
| E62 |
Washer-dryer combo displays E62 and overheats during drying; may shut off early or feel extremely hot to the touch.
|
Dryer Overheating / Temperature Sensor Error | View Details |
| E63 |
Washer-dryer combo shows E63 and may stop heating during dry; heater relay fault indicated.
|
Heater Relay / Heating Circuit Control Error | View Details |
| E71 |
Washer-dryer combo shows E71 and will not advance properly through wash cycles; water temperature may be incorrect.
|
Water Temperature Sensor (NTC) Error | View Details |
| E72 |
Washer-dryer combo displays E72 and may not regulate dryer temperature correctly; clothes may be under-dried or overheated.
|
Dryer Temperature Sensor (Thermistor) Error | View Details |
| E81 |
Washer-dryer combo shows E81 and will not start; display and buttons may be unresponsive or partially functional.
|
User Interface / Control Panel Communication Error | View Details |
| E82 |
Washer-dryer combo displays E82 and cycles may stop unexpectedly; some functions may not respond.
|
Main Control Board Error | View Details |
| E90 |
Washer-dryer combo shows E90 and will not start; may indicate a general communication or configuration fault.
|
System Communication / Configuration Error | View Details |
| E91 |
Washer-dryer combo displays E91 and may not communicate between UI and main control; display may be blank or show partial info.
|
UI to Main Control Communication Failure | View Details |
| H20 |
Washer-dryer combo displays H20 and takes a long time to fill or does not fill at all.
|
Low Water Flow / Fill Error | View Details |
| LE |
Washer-dryer combo shows LE and the drum does not rotate; may hum briefly then stop.
|
Motor Locked / Overload Error | View Details |
| OE |
Washer-dryer combo shows OE and will not drain; water remains in the drum.
|
Drain Error / Pump Timeout | View Details |
| PF |
Washer-dryer combo displays PF and cycle stops; may occur after a power interruption.
|
Power Failure / Voltage Interruption | View Details |
| Sud |
Washer-dryer combo displays Sud or excessive suds warning; drum may pause and perform extra rinses.
|
Excessive Suds / Suds Lock | View Details |
| tE |
Washer-dryer combo displays tE during a wash or dry cycle; may stop heating or washing.
|
Temperature Sensor Error (Generic) | View Details |
| UE |
Washer-dryer combo displays UE and will not reach full spin speed; drum may repeatedly try to balance the load.
|
Unbalanced Load / Spin Imbalance Detection | View Details |
| – |
Washer-dryer combo buttons are unresponsive or some keys do not work.
|
User Interface Keypad Failure | View Details |
| – |
Washer-dryer combo display is dead; no lights or response when pressing buttons.
|
No Power / Dead Control | View Details |
| – |
Washer-dryer combo does not dry clothes effectively; clothes come out damp after full dry cycle.
|
Poor Drying Performance | View Details |
| – |
Washer-dryer combo door will not unlock at the end of the cycle, but no error code is displayed.
|
Door Lock Stuck Closed | View Details |
| – |
Washer-dryer combo drum does not turn during wash or dry, but you can hear the motor running.
|
Broken or Slipped Drive Belt | View Details |
| – |
Washer-dryer combo emits a burning smell during wash or dry cycles.
|
Overheating Component or Belt Slippage | View Details |
| – |
Washer-dryer combo emits a grinding or rumbling noise, especially at high spin speeds.
|
Drum Bearing or Spider Arm Failure | View Details |
| – |
Washer-dryer combo has a musty or moldy odor inside the drum or around the door.
|
Biofilm / Mold Growth in Tub and Gasket | View Details |
| – |
Washer-dryer combo leaks water from the front door area during wash or rinse cycles.
|
Door Gasket (Boot) Leak | View Details |
| – |
Washer-dryer combo leaks water from the rear or bottom during fill or wash.
|
Internal Hose or Pump Leak | View Details |
| – |
Washer-dryer combo leaves clothes very wet at the end of the cycle; spin seems weak or short.
|
Poor Spin Extraction | View Details |
| – |
Washer-dryer combo makes loud banging or knocking noises during spin.
|
Out-of-Balance / Suspension Wear | View Details |
| – |
Washer-dryer combo produces a high-pitched squeal or screech during spin or tumble.
|
Drive Belt or Idler Pulley Noise | View Details |
| – |
Washer-dryer combo trips the household circuit breaker during operation.
|
Electrical Short or Overload | View Details |
| – |
Washer-dryer combo vibrates excessively and may move or "walk" during spin.
|
Excessive Vibration / Installation Issue | View Details |
| – |
Washer-dryer combo will not start; lights may be on but pressing Start does nothing.
|
No Start / Control or Door Interlock Issue | View Details |
No matching codes found
Advertisements