GE Profile
Drum Bearing or Spider Arm Failure
Washer-dryer combo emits a grinding or rumbling noise, especially at high spin speeds.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn rear tub bearings, Corroded drum spider assembly, Loose drum pulley, Foreign object in tub bearing area
How to Fix / Troubleshooting
Safety first: Unplug the unit. Bearing replacement involves significant disassembly.
- Check drum play: With the door open, lift the drum up and down. Excessive movement or grinding indicates bearing wear.
- Inspect pulley: Remove the rear panel and check that the drum pulley is tight on the shaft.
- Assess repair scope: If bearings are noisy, the typical repair is replacing the entire rear tub assembly (with bearings) and sometimes the inner drum/spider. This is a complex job often best left to a professional.
- Short-term mitigation: Reduce spin speed settings to lessen noise until proper repair can be performed.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Rear Tub Assembly with Bearings
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements