Hansa
No Power / Main Supply or Control Failure
Washer-dryer does not power on at all; no lights or display
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown mains fuse or tripped breaker, Faulty power cord, Defective main power switch, Failed main control module
How to Fix / Troubleshooting
Safety first: Ensure the outlet is safe and not overloaded. Unplug the appliance before opening any panels.
- Step 1 – Check outlet: Test the wall socket with another appliance. Reset any tripped breakers or replace blown fuses as needed.
- Step 2 – Inspect power cord: Examine the Hansa power cord for cuts, burns, or kinks. Replace if damaged.
- Step 3 – Power switch and filter: Remove the top panel and locate the mains filter and power switch. Check for loose wires or burnt components. Test the switch for continuity when turned on.
- Step 4 – Control board: If power reaches the PCB but there is no display, the board's low-voltage power supply may have failed. Look for bulging capacitors or burnt areas. Replacement of the main control module is usually required.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Module (PCB)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements