E17
Ikea
Water Flow Meter Fault
Washer-dryer shows E17; often associated with water inlet or flow meter issues
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty flow meter (water flow sensor), Blocked inlet causing irregular flow, Loose wiring to flow sensor, Control board misreading pulses
How to Fix / Troubleshooting
Safety first: Unplug the appliance and close the water tap before removing hoses or panels.
Step-by-step checks:
- 1. Clean inlet filters and check pressure: As with E02, ensure good water flow and clean filters.
- 2. Locate flow meter: On many Ikea/Whirlpool combos, the flow meter is integrated into the inlet valve or in-line on the inlet hose inside the machine. Remove the top cover to locate it.
- 3. Inspect wiring: Check the small connector and wires from the flow meter to the main PCB for damage or loose fit.
- 4. Replace flow meter: If water flow is normal but E17 persists, replace the flow meter or the complete inlet valve assembly if they are combined.
- 5. Control board: Persistent E17 with a new flow meter may indicate a PCB fault requiring technician service.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Flow Meter
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements