Ikea Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Washer-dryer will not start a cycle; display shows E01 and door symbol may flash
Door Lock Failure
E02
Washer-dryer does not fill with water or fills very slowly; E02 displayed
Water Inlet Timeout / Low Fill
E03
Washer-dryer does not drain water; cycle stops with water in drum and E03 displayed
Drain Pump Failure / Drain Timeout
E04
Washer-dryer overfills or shows E04; water may be visible in the door glass above normal level
Overfill / Water Level Sensor Fault
E05
Washer-dryer stops during wash; water remains cold and E05 is displayed
Water Heating Failure
E06
Washer-dryer drum does not turn; E06 displayed shortly after cycle starts
Motor Drive Fault
E07
Washer-dryer will not spin; E07 displayed near spin phase
Unbalanced Load / Spin Protection Fault
E08
Washer-dryer stops during drying cycle; E08 displayed and laundry remains wet
Dryer Heating Circuit Fault
E09
Washer-dryer shows E09 and stops; may be related to dryer function or internal communication
Dryer Sensor / NTC Fault
E10
Washer-dryer displays E10 and will not start or stops mid-cycle
Configuration / Communication Error
E11
Washer-dryer shows E11; door may not unlock at end of cycle
Door Unlock Fault
E12
Washer-dryer shows E12 during drying; clothes remain damp and cycle ends prematurely
Dryer Moisture Sensing Fault
E13
Washer-dryer displays E13 and may stop with water in base tray; possible leak detected
Leak / Anti-Flood System Activated
E14
Washer-dryer shows E14; drying performance poor or no heat
Condenser / Airflow Blockage
E15
Washer-dryer shows E15; may not start or may stop unexpectedly
Power Supply / Voltage Error
E16
Washer-dryer shows E16; water remains in drum and door may stay locked
Drain / Siphon Error
E17
Washer-dryer shows E17; often associated with water inlet or flow meter issues
Water Flow Meter Fault
E18
Washer-dryer shows E18; may stop during spin or show abnormal drum speed behavior
Motor Tachometer / Speed Sensing Fault
E19
Washer-dryer shows E19; may be related to internal valve switching for wash/dry
Diverter Valve / Drying Water Valve Fault
E20
Washer-dryer shows E20; may not start drying or may stop shortly after starting
Dryer Pump / Condenser Water Pump Fault
Symptom
Detergent remains in the drawer after the wash cycle
Detergent Drawer Water Flow Issue
Symptom
Washer-dryer combo leaks from the rear or underneath during wash or spin
Internal Hose or Pump Leak
Symptom
Washer-dryer combo leaks water from the front door area during wash or rinse
Door Gasket (Boot Seal) Leak
Symptom
Washer-dryer displays random lights or beeps without user input
User Interface Glitch or Moisture Ingress
Symptom
Washer-dryer does not dry clothes properly; clothes come out damp after full drying cycle
Poor Drying Performance
Symptom
Washer-dryer door is difficult to open or close; may require force
Door Hinge or Latch Misalignment
Symptom
Washer-dryer drum does not turn during wash but can be turned by hand
Drive Belt Slipped or Broken
Symptom
Washer-dryer emits a burning smell during wash or dry cycles
Overheating Component or Belt Slippage
Symptom
Washer-dryer emits loud humming but does not fill with water at the start of cycle
Water Inlet Valve Stuck or Blocked
Symptom
Washer-dryer fills and drains repeatedly without progressing in the cycle
Pressure System or Siphoning Issue
Symptom
Washer-dryer leaves clothes smelling musty or moldy after washing
Biofilm / Mold Build-up in Drum and Hoses
Symptom
Washer-dryer leaves clothes very wet at the end of the cycle (poor spin performance)
Spin Inefficiency / Drain or Load Issue
Symptom
Washer-dryer makes loud banging or knocking noises during spin
Suspension or Drum Support Failure
Symptom
Washer-dryer produces a high-pitched squeal or grinding noise when spinning
Drum Bearing or Drive Pulley Wear
Symptom
Washer-dryer stops mid-cycle and door remains locked with water inside, but no error code displayed
Intermittent Power or Control Fault
Symptom
Washer-dryer takes much longer than expected to complete cycles
Extended Cycle Time / Sensor Compensation
Symptom
Washer-dryer vibrates excessively and "walks" across the floor during spin
Excessive Vibration / Poor Installation
Symptom
Washer-dryer will not power on at all; no lights or display
No Power / Dead Appliance
Symptom
Washer-dryer will not start; lights on but no response when pressing Start
User Interface / Control Lock Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Washer-dryer will not start a cycle; display shows E01 and door symbol may flash
|
Door Lock Failure | View Details |
| E02 |
Washer-dryer does not fill with water or fills very slowly; E02 displayed
|
Water Inlet Timeout / Low Fill | View Details |
| E03 |
Washer-dryer does not drain water; cycle stops with water in drum and E03 displayed
|
Drain Pump Failure / Drain Timeout | View Details |
| E04 |
Washer-dryer overfills or shows E04; water may be visible in the door glass above normal level
|
Overfill / Water Level Sensor Fault | View Details |
| E05 |
Washer-dryer stops during wash; water remains cold and E05 is displayed
|
Water Heating Failure | View Details |
| E06 |
Washer-dryer drum does not turn; E06 displayed shortly after cycle starts
|
Motor Drive Fault | View Details |
| E07 |
Washer-dryer will not spin; E07 displayed near spin phase
|
Unbalanced Load / Spin Protection Fault | View Details |
| E08 |
Washer-dryer stops during drying cycle; E08 displayed and laundry remains wet
|
Dryer Heating Circuit Fault | View Details |
| E09 |
Washer-dryer shows E09 and stops; may be related to dryer function or internal communication
|
Dryer Sensor / NTC Fault | View Details |
| E10 |
Washer-dryer displays E10 and will not start or stops mid-cycle
|
Configuration / Communication Error | View Details |
| E11 |
Washer-dryer shows E11; door may not unlock at end of cycle
|
Door Unlock Fault | View Details |
| E12 |
Washer-dryer shows E12 during drying; clothes remain damp and cycle ends prematurely
|
Dryer Moisture Sensing Fault | View Details |
| E13 |
Washer-dryer displays E13 and may stop with water in base tray; possible leak detected
|
Leak / Anti-Flood System Activated | View Details |
| E14 |
Washer-dryer shows E14; drying performance poor or no heat
|
Condenser / Airflow Blockage | View Details |
| E15 |
Washer-dryer shows E15; may not start or may stop unexpectedly
|
Power Supply / Voltage Error | View Details |
| E16 |
Washer-dryer shows E16; water remains in drum and door may stay locked
|
Drain / Siphon Error | View Details |
| E17 |
Washer-dryer shows E17; often associated with water inlet or flow meter issues
|
Water Flow Meter Fault | View Details |
| E18 |
Washer-dryer shows E18; may stop during spin or show abnormal drum speed behavior
|
Motor Tachometer / Speed Sensing Fault | View Details |
| E19 |
Washer-dryer shows E19; may be related to internal valve switching for wash/dry
|
Diverter Valve / Drying Water Valve Fault | View Details |
| E20 |
Washer-dryer shows E20; may not start drying or may stop shortly after starting
|
Dryer Pump / Condenser Water Pump Fault | View Details |
| – |
Detergent remains in the drawer after the wash cycle
|
Detergent Drawer Water Flow Issue | View Details |
| – |
Washer-dryer combo leaks from the rear or underneath during wash or spin
|
Internal Hose or Pump Leak | View Details |
| – |
Washer-dryer combo leaks water from the front door area during wash or rinse
|
Door Gasket (Boot Seal) Leak | View Details |
| – |
Washer-dryer displays random lights or beeps without user input
|
User Interface Glitch or Moisture Ingress | View Details |
| – |
Washer-dryer does not dry clothes properly; clothes come out damp after full drying cycle
|
Poor Drying Performance | View Details |
| – |
Washer-dryer door is difficult to open or close; may require force
|
Door Hinge or Latch Misalignment | View Details |
| – |
Washer-dryer drum does not turn during wash but can be turned by hand
|
Drive Belt Slipped or Broken | View Details |
| – |
Washer-dryer emits a burning smell during wash or dry cycles
|
Overheating Component or Belt Slippage | View Details |
| – |
Washer-dryer emits loud humming but does not fill with water at the start of cycle
|
Water Inlet Valve Stuck or Blocked | View Details |
| – |
Washer-dryer fills and drains repeatedly without progressing in the cycle
|
Pressure System or Siphoning Issue | View Details |
| – |
Washer-dryer leaves clothes smelling musty or moldy after washing
|
Biofilm / Mold Build-up in Drum and Hoses | View Details |
| – |
Washer-dryer leaves clothes very wet at the end of the cycle (poor spin performance)
|
Spin Inefficiency / Drain or Load Issue | View Details |
| – |
Washer-dryer makes loud banging or knocking noises during spin
|
Suspension or Drum Support Failure | View Details |
| – |
Washer-dryer produces a high-pitched squeal or grinding noise when spinning
|
Drum Bearing or Drive Pulley Wear | View Details |
| – |
Washer-dryer stops mid-cycle and door remains locked with water inside, but no error code displayed
|
Intermittent Power or Control Fault | View Details |
| – |
Washer-dryer takes much longer than expected to complete cycles
|
Extended Cycle Time / Sensor Compensation | View Details |
| – |
Washer-dryer vibrates excessively and "walks" across the floor during spin
|
Excessive Vibration / Poor Installation | View Details |
| – |
Washer-dryer will not power on at all; no lights or display
|
No Power / Dead Appliance | View Details |
| – |
Washer-dryer will not start; lights on but no response when pressing Start
|
User Interface / Control Lock Issue | View Details |
No matching codes found
Advertisements