Washer-dryer takes much longer than expected to complete cycles

Safety first: Most checks can be done with the appliance unplugged; reconnect only when running test cycles.

Step-by-step checks:

• 1. Check water pressure: Ensure good flow at the inlet tap and clean the inlet filters.
• 2. Heater function: If water does not heat properly, the machine may extend the wash. Test the heating element as described for E05.
• 3. Load and balance: Avoid overloading and ensure mixed loads to reduce unbalance corrections.
• 4. Detergent use: Use the correct amount of HE detergent to avoid excessive suds, which can trigger extra rinses.