Washer-dryer combo stops and displays CE; may occur during heavy loads or spin.

Safety first: Unplug the appliance before internal inspection.

• 1. Reduce load:
  • Remove some items and restart the cycle.
  • Avoid washing heavy rugs or large blankets alone.
• 2. Check drum movement:
  • Spin the drum by hand; it should move freely without grinding.
  • Grinding or stiffness indicates bearing or foreign object issues.
• 3. Inspect motor and stator:
  • Remove the rear panel and rotor.
  • Check stator windings for burn marks.
  • Test for shorts with a multimeter; replace stator if defective.
• 4. Control board:
  • If mechanical and motor components are good, the main PCB may be mis-sensing current; technician service is recommended.