LG Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
Add
Washer-dryer combo displays Add or Add Garment; door may still be unlocked early in cycle.
Add Garment Indicator (Not a Fault)
Cd
Washer-dryer combo displays Cd at the end of a drying cycle; drum may tumble intermittently.
Cool Down Indicator (Not a Fault)
CE
Washer-dryer combo stops and displays CE; may occur during heavy loads or spin.
Current Error / Motor Overcurrent
CL
Washer-dryer combo controls are locked; buttons do not respond and CL is shown on display.
Child Lock Activated
dE
Washer-dryer combo will not start or stops mid-cycle with dE displayed; door will not lock or is detected as open.
Door Lock / Door Switch Error
dE1
Washer-dryer combo displays dE1 and will not start; door is detected as not properly closed.
Door Not Fully Closed Detection
dE2
Washer-dryer combo displays dE2; door lock mechanism is stuck in the locked position or fails to unlock at end of cycle.
Door Lock Stuck / Unlock Failure
E1
Washer-dryer combo displays E1; often associated with water leakage into base or overflow sensor activation.
Leakage / Overflow Sensor Error
E3
Washer-dryer combo displays E3; drum may not rotate correctly or may be obstructed.
Drum / Motor Drive Error
FE
Washer-dryer combo overfills with water or shows FE; water may be visible in drum when unit is off.
Water Overflow / Fill Level Error
HE
Washer-dryer combo displays HE during drying; no heat or very low heat in dryer mode.
Dryer Heater Error
HE1
Washer-dryer combo shows HE1; dryer overheats or shuts down quickly.
Dryer Overheating Error
HE2
Washer-dryer combo displays HE2; dryer does not reach target temperature or cycles erratically.
Dryer Heater Control Error
IE
Washer-dryer combo does not fill with water or fills very slowly; IE error appears shortly after cycle start.
Water Inlet Fill Error
LE
Washer-dryer combo will not tumble or spin; LE error appears, often accompanied by humming from the motor area.
Motor Lock / Overload Error
LE1
Washer-dryer combo shows LE1; often associated with water leakage into motor area or motor overload.
Motor Overload / Water Ingress Error
OE
Washer-dryer combo will not drain; cycle stops with water remaining in drum and OE displayed.
Drain System Failure
PE
Washer-dryer combo displays PE and may stop mid-fill or mid-cycle.
Water Level Pressure Sensor Error
PF
Washer-dryer combo displays PF; cycle stops unexpectedly, often after a power interruption.
Power Failure / Power Interruption
SE
Washer-dryer combo displays SE; motor may not run or runs erratically.
Motor Tachometer / Hall Sensor Error
SUD
Washer-dryer combo displays SUD or excessive suds; drum may pause frequently and rinse cycles extend.
Excessive Suds Detection
tE
Washer-dryer combo displays tE during wash or dry cycles; water may not heat properly.
Thermistor (Temperature Sensor) Error
tE1
Washer-dryer combo shows tE1 during drying; drying function stops or does not heat.
Dryer Exhaust Thermistor Error
tE2
Washer-dryer combo displays tE2; often associated with heater or high-limit thermostat issues in drying mode.
Dryer Heater Temperature Error
tE3
Washer-dryer combo shows tE3; drying performance is poor or unit stops drying prematurely.
Dryer Inlet Thermistor / Temperature Sensor Error
UE
Washer-dryer combo will not spin properly; drum repeatedly tries to balance load, then stops with UE displayed.
Unbalanced Load / Spin Fault
Symptom
Washer-dryer combo does not dispense detergent or softener from the drawer.
Dispenser Drawer Malfunction
Symptom
Washer-dryer combo door will not unlock at end of cycle; no error code displayed.
Door Stuck Locked
Symptom
Washer-dryer combo emits a burning smell during wash or dry cycles.
Overheating / Electrical or Belt Odor (where applicable)
Symptom
Washer-dryer combo fills with water but will not agitate or tumble in wash mode.
No Wash Tumble / Motor Drive Failure
Symptom
Washer-dryer combo has a persistent musty or moldy odor inside the drum.
Biofilm / Mold Growth in Drum and Gasket
Symptom
Washer-dryer combo intermittently shuts off or restarts mid-cycle without error code.
Intermittent Power / Control Reset
Symptom
Washer-dryer combo leaks water from the front, often around the door area.
Front Door Leak
Symptom
Washer-dryer combo leaks water from the rear or bottom during wash or drain.
Rear / Bottom Leak
Symptom
Washer-dryer combo leaves clothes very wrinkled after drying.
Wrinkling / Overdrying or Poor Tumble
Symptom
Washer-dryer combo makes loud banging or knocking noises during spin.
Excessive Vibration / Out-of-Balance Spin
Symptom
Washer-dryer combo produces a high-pitched squeal or grinding noise when spinning.
Drum Bearing or Seal Failure
Symptom
Washer-dryer combo takes excessively long to dry clothes or clothes remain damp at end of cycle.
Poor Drying Performance
Symptom
Washer-dryer combo will not power on; no lights or display response.
No Power / Dead Control
Symptom
Washer-dryer combo will not spin or spins very slowly; clothes come out very wet.
No Spin / Weak Spin
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| Add |
Washer-dryer combo displays Add or Add Garment; door may still be unlocked early in cycle.
|
Add Garment Indicator (Not a Fault) | View Details |
| Cd |
Washer-dryer combo displays Cd at the end of a drying cycle; drum may tumble intermittently.
|
Cool Down Indicator (Not a Fault) | View Details |
| CE |
Washer-dryer combo stops and displays CE; may occur during heavy loads or spin.
|
Current Error / Motor Overcurrent | View Details |
| CL |
Washer-dryer combo controls are locked; buttons do not respond and CL is shown on display.
|
Child Lock Activated | View Details |
| dE |
Washer-dryer combo will not start or stops mid-cycle with dE displayed; door will not lock or is detected as open.
|
Door Lock / Door Switch Error | View Details |
| dE1 |
Washer-dryer combo displays dE1 and will not start; door is detected as not properly closed.
|
Door Not Fully Closed Detection | View Details |
| dE2 |
Washer-dryer combo displays dE2; door lock mechanism is stuck in the locked position or fails to unlock at end of cycle.
|
Door Lock Stuck / Unlock Failure | View Details |
| E1 |
Washer-dryer combo displays E1; often associated with water leakage into base or overflow sensor activation.
|
Leakage / Overflow Sensor Error | View Details |
| E3 |
Washer-dryer combo displays E3; drum may not rotate correctly or may be obstructed.
|
Drum / Motor Drive Error | View Details |
| FE |
Washer-dryer combo overfills with water or shows FE; water may be visible in drum when unit is off.
|
Water Overflow / Fill Level Error | View Details |
| HE |
Washer-dryer combo displays HE during drying; no heat or very low heat in dryer mode.
|
Dryer Heater Error | View Details |
| HE1 |
Washer-dryer combo shows HE1; dryer overheats or shuts down quickly.
|
Dryer Overheating Error | View Details |
| HE2 |
Washer-dryer combo displays HE2; dryer does not reach target temperature or cycles erratically.
|
Dryer Heater Control Error | View Details |
| IE |
Washer-dryer combo does not fill with water or fills very slowly; IE error appears shortly after cycle start.
|
Water Inlet Fill Error | View Details |
| LE |
Washer-dryer combo will not tumble or spin; LE error appears, often accompanied by humming from the motor area.
|
Motor Lock / Overload Error | View Details |
| LE1 |
Washer-dryer combo shows LE1; often associated with water leakage into motor area or motor overload.
|
Motor Overload / Water Ingress Error | View Details |
| OE |
Washer-dryer combo will not drain; cycle stops with water remaining in drum and OE displayed.
|
Drain System Failure | View Details |
| PE |
Washer-dryer combo displays PE and may stop mid-fill or mid-cycle.
|
Water Level Pressure Sensor Error | View Details |
| PF |
Washer-dryer combo displays PF; cycle stops unexpectedly, often after a power interruption.
|
Power Failure / Power Interruption | View Details |
| SE |
Washer-dryer combo displays SE; motor may not run or runs erratically.
|
Motor Tachometer / Hall Sensor Error | View Details |
| SUD |
Washer-dryer combo displays SUD or excessive suds; drum may pause frequently and rinse cycles extend.
|
Excessive Suds Detection | View Details |
| tE |
Washer-dryer combo displays tE during wash or dry cycles; water may not heat properly.
|
Thermistor (Temperature Sensor) Error | View Details |
| tE1 |
Washer-dryer combo shows tE1 during drying; drying function stops or does not heat.
|
Dryer Exhaust Thermistor Error | View Details |
| tE2 |
Washer-dryer combo displays tE2; often associated with heater or high-limit thermostat issues in drying mode.
|
Dryer Heater Temperature Error | View Details |
| tE3 |
Washer-dryer combo shows tE3; drying performance is poor or unit stops drying prematurely.
|
Dryer Inlet Thermistor / Temperature Sensor Error | View Details |
| UE |
Washer-dryer combo will not spin properly; drum repeatedly tries to balance load, then stops with UE displayed.
|
Unbalanced Load / Spin Fault | View Details |
| – |
Washer-dryer combo does not dispense detergent or softener from the drawer.
|
Dispenser Drawer Malfunction | View Details |
| – |
Washer-dryer combo door will not unlock at end of cycle; no error code displayed.
|
Door Stuck Locked | View Details |
| – |
Washer-dryer combo emits a burning smell during wash or dry cycles.
|
Overheating / Electrical or Belt Odor (where applicable) | View Details |
| – |
Washer-dryer combo fills with water but will not agitate or tumble in wash mode.
|
No Wash Tumble / Motor Drive Failure | View Details |
| – |
Washer-dryer combo has a persistent musty or moldy odor inside the drum.
|
Biofilm / Mold Growth in Drum and Gasket | View Details |
| – |
Washer-dryer combo intermittently shuts off or restarts mid-cycle without error code.
|
Intermittent Power / Control Reset | View Details |
| – |
Washer-dryer combo leaks water from the front, often around the door area.
|
Front Door Leak | View Details |
| – |
Washer-dryer combo leaks water from the rear or bottom during wash or drain.
|
Rear / Bottom Leak | View Details |
| – |
Washer-dryer combo leaves clothes very wrinkled after drying.
|
Wrinkling / Overdrying or Poor Tumble | View Details |
| – |
Washer-dryer combo makes loud banging or knocking noises during spin.
|
Excessive Vibration / Out-of-Balance Spin | View Details |
| – |
Washer-dryer combo produces a high-pitched squeal or grinding noise when spinning.
|
Drum Bearing or Seal Failure | View Details |
| – |
Washer-dryer combo takes excessively long to dry clothes or clothes remain damp at end of cycle.
|
Poor Drying Performance | View Details |
| – |
Washer-dryer combo will not power on; no lights or display response.
|
No Power / Dead Control | View Details |
| – |
Washer-dryer combo will not spin or spins very slowly; clothes come out very wet.
|
No Spin / Weak Spin | View Details |
No matching codes found
Advertisements