E32
Midea
Motor Tachometer / Speed Feedback Error
Washer-dryer combo shows E32 and may not spin properly; speed control seems unstable.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty tachometer sensor on motor, Loose tach wiring, Damaged motor connector, Defective motor control circuit on PCB
How to Fix / Troubleshooting
Safety first: Disconnect power and be cautious of sharp edges when accessing the motor.
- Access motor: Remove the rear panel and locate the Midea drive motor.
- Inspect tach wiring: The tachometer wires are usually a small pair leading from the motor to the harness. Check for damage or loose connections.
- Check connector: Ensure the motor plug is fully seated in the harness.
- Test tach sensor: With a multimeter, measure resistance across the tach terminals. An open circuit indicates a failed sensor.
- Replace motor or tach: On many Midea motors, the tach is integrated; replace the motor assembly if the tach is defective.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Drive Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements