Washer-dryer combo displays E9 and may stop with water still in the drum or show erratic water levels.

Safety first: Unplug the appliance immediately and close the water supply taps if water continues to enter the drum.

• Observe behavior: If water keeps filling even when the machine is off, the inlet valve is likely stuck open mechanically.
• Inspect inlet valve: Remove the top cover and locate the Midea water inlet valve. Check for debris or scale that may prevent the valve from closing.
• Check pressure system: Inspect the pressure hose and sensor as described for E7. A blocked hose can cause the control to think the drum is not full yet.
• Test valve electrically: With power disconnected, measure coil resistance. If coils are in range but valve leaks water when de-energized, replace the valve assembly.
• Do not use until fixed: Overfilling can cause flooding. Replace any faulty components before resuming normal operation.