Midea
Door Lock Stuck Closed
Washer-dryer combo door remains locked after cycle ends and cannot be opened.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Door lock mechanism jammed, Control board not sending unlock signal, Water still detected in drum, Faulty door lock sensor
How to Fix / Troubleshooting
Safety first: Do not force the door open; this can break the lock or hinge.
- Wait a few minutes: Many Midea combos delay unlocking for 1–3 minutes after spin.
- Check for water: If water is visible in the drum, run a drain/spin cycle. The door will not unlock if the level sensor detects water.
- Power reset: Unplug the machine for 5 minutes, then plug back in and try to unlock.
- Emergency release: Access the emergency door release (often a pull cord near the pump filter) to open the door manually.
- Inspect/replace lock: If the problem recurs, replace the Midea door lock assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements