Stoves Door Lock Stuck Closed

Washer-dryer combo door will not open at end of cycle, but no error code is shown.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Door interlock not releasing, Water still detected in drum, High drum temperature after drying, Faulty door handle mechanism

Safety first: Do not force the door open. Unplug the appliance and wait several minutes.

Step-by-step checks:

Wait for safety delay: Many combos keep the door locked for 1–2 minutes after cycle end or drying to cool down.
Check for water: If water remains in the drum, run a drain or spin-only cycle.
Manual release: Use the manual door release (if provided) behind the pump filter flap or lower panel.
Inspect lock and handle: Once open, check the door lock and handle for damage and replace if necessary.

Medium 3/5

Door Interlock Assembly

Check Price on Amazon

We may earn a commission from links on this page.