Stoves
Stoves Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Washer-dryer combo will not start a cycle; display shows E01 and door symbol may flash.
Door Lock Failure
E02
Washer-dryer combo does not fill with water or fills very slowly; E02 displayed shortly after cycle start.
Water Inlet Fill Fault
E03
Washer-dryer combo does not drain water; cycle stops with water left in drum and E03 displayed.
Drain Pump or Drainage Fault
E04
Washer-dryer combo overfills or shows E04 shortly after filling; may attempt to drain continuously.
Overfill / Pressure Sensor Fault
E05
Washer-dryer combo does not heat water during wash; cycles complete cold and E05 is displayed.
Wash Heater Circuit Fault
E06
Washer-dryer combo drum does not rotate during wash or spin; E06 displayed after attempting to start motor.
Motor Drive Fault
E07
Washer-dryer combo fails to reach or maintain spin speed; E07 displayed during spin phase.
Motor Tachometer / Speed Sensing Fault
E08
Washer-dryer combo stops mid-cycle with E08; drum may be difficult to turn by hand.
Drum Motor Overload / Mechanical Jam
E09
Washer-dryer combo trips the household breaker or shows E09 when heating water.
Heater Earth Leakage / Short Circuit
E10
Washer-dryer combo does not heat during drying cycle; clothes come out wet and cold; E10 displayed.
Dryer Heater Circuit Fault
E11
Washer-dryer combo overheats during drying; very hot door and cabinet; E11 displayed and drying stops.
Dryer Overheat Protection Trip
E12
Washer-dryer combo shows E12 and stops during drying; clothes remain damp; may indicate condenser or sensor issue.
Dryer Condenser / Moisture Sensor Fault
E13
Washer-dryer combo displays E13 and may leak or stop mid-cycle; often associated with internal leak detection.
Leak / Anti-Flood System Activation
E14
Washer-dryer combo shows E14 and fails to take detergent or softener from the dispenser drawer.
Dispenser Valve / Drawer Flow Fault
E15
Washer-dryer combo displays E15 and will not start; often associated with control board communication issues.
Main Control Board / User Interface Communication Fault
E16
Washer-dryer combo shows E16 and the door will not unlock at end of cycle.
Door Unlock Timeout / Lock Stuck
E17
Washer-dryer combo displays E17 and will not start; often related to child lock or safety interlock.
Child Lock / Safety Lock Active
E18
Washer-dryer combo shows E18 and stops; often associated with unbalanced load or spin safety.
Unbalanced Load / Spin Protection
E19
Washer-dryer combo displays E19 and may not respond to control inputs.
EEPROM / Program Memory Error
E20
Washer-dryer combo shows E20 and stops; may be related to motor or inverter on certain models.
Inverter Motor Drive Error
Symptom
Washer-dryer combo displays incorrect water temperature (too hot or too cold) compared to program setting, without an error code.
Temperature Regulation Drift
Symptom
Washer-dryer combo does not dry clothes effectively; clothes remain damp after full drying program, no code shown.
Poor Drying Performance
Symptom
Washer-dryer combo does not start at all; no lights or display, and no error code.
No Power / Mains Supply Fault
Symptom
Washer-dryer combo door glass becomes excessively hot during drying, more than usual.
Dryer Temperature Regulation Fault
Symptom
Washer-dryer combo door will not open at end of cycle, but no error code is shown.
Door Lock Stuck Closed
Symptom
Washer-dryer combo drum does not turn during drying, though it may turn during washing.
Dryer Drive / Direction Control Fault
Symptom
Washer-dryer combo emits a high-pitched squeal or grinding noise when spinning or tumbling.
Drum Bearing or Drive Belt Noise
Symptom
Washer-dryer combo has a strong musty or mouldy smell inside the drum and on clothes.
Biofilm / Mould Build-up in Tub and Hoses
Symptom
Washer-dryer combo leaks from the rear or underneath during drain or spin, with no error code.
Drain Hose or Pump Leak
Symptom
Washer-dryer combo leaks water from the front, especially during wash or rinse, but no error code is displayed.
Door Seal (Gasket) Leak
Symptom
Washer-dryer combo leaves clothes very wet at the end of the cycle, but no error code is shown.
Poor Spin Performance
Symptom
Washer-dryer combo leaves detergent residues or white streaks on clothes after washing.
Poor Rinsing / Detergent Dispensing Issue
Symptom
Washer-dryer combo makes loud banging or knocking noises during spin, but completes the cycle.
Suspension / Shock Absorber Wear
Symptom
Washer-dryer combo occasionally trips the RCD or GFCI during operation, with no specific error code.
Intermittent Earth Leakage
Symptom
Washer-dryer combo powers on but will not start a cycle; start button unresponsive and no code shown.
User Interface / Control Panel Fault
Symptom
Washer-dryer combo stops during drying and the cabinet feels very hot, but no error code is displayed.
Dryer Overheating / Thermostat Cycling
Symptom
Washer-dryer combo takes excessively long to complete cycles, with no error code.
Extended Cycle Time / Heating or Drain Inefficiency
Symptom
Washer-dryer combo vibrates excessively and walks across the floor during spin.
Excessive Vibration / Installation Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Washer-dryer combo will not start a cycle; display shows E01 and door symbol may flash.
|
Door Lock Failure | View Details |
| E02 |
Washer-dryer combo does not fill with water or fills very slowly; E02 displayed shortly after cycle start.
|
Water Inlet Fill Fault | View Details |
| E03 |
Washer-dryer combo does not drain water; cycle stops with water left in drum and E03 displayed.
|
Drain Pump or Drainage Fault | View Details |
| E04 |
Washer-dryer combo overfills or shows E04 shortly after filling; may attempt to drain continuously.
|
Overfill / Pressure Sensor Fault | View Details |
| E05 |
Washer-dryer combo does not heat water during wash; cycles complete cold and E05 is displayed.
|
Wash Heater Circuit Fault | View Details |
| E06 |
Washer-dryer combo drum does not rotate during wash or spin; E06 displayed after attempting to start motor.
|
Motor Drive Fault | View Details |
| E07 |
Washer-dryer combo fails to reach or maintain spin speed; E07 displayed during spin phase.
|
Motor Tachometer / Speed Sensing Fault | View Details |
| E08 |
Washer-dryer combo stops mid-cycle with E08; drum may be difficult to turn by hand.
|
Drum Motor Overload / Mechanical Jam | View Details |
| E09 |
Washer-dryer combo trips the household breaker or shows E09 when heating water.
|
Heater Earth Leakage / Short Circuit | View Details |
| E10 |
Washer-dryer combo does not heat during drying cycle; clothes come out wet and cold; E10 displayed.
|
Dryer Heater Circuit Fault | View Details |
| E11 |
Washer-dryer combo overheats during drying; very hot door and cabinet; E11 displayed and drying stops.
|
Dryer Overheat Protection Trip | View Details |
| E12 |
Washer-dryer combo shows E12 and stops during drying; clothes remain damp; may indicate condenser or sensor issue.
|
Dryer Condenser / Moisture Sensor Fault | View Details |
| E13 |
Washer-dryer combo displays E13 and may leak or stop mid-cycle; often associated with internal leak detection.
|
Leak / Anti-Flood System Activation | View Details |
| E14 |
Washer-dryer combo shows E14 and fails to take detergent or softener from the dispenser drawer.
|
Dispenser Valve / Drawer Flow Fault | View Details |
| E15 |
Washer-dryer combo displays E15 and will not start; often associated with control board communication issues.
|
Main Control Board / User Interface Communication Fault | View Details |
| E16 |
Washer-dryer combo shows E16 and the door will not unlock at end of cycle.
|
Door Unlock Timeout / Lock Stuck | View Details |
| E17 |
Washer-dryer combo displays E17 and will not start; often related to child lock or safety interlock.
|
Child Lock / Safety Lock Active | View Details |
| E18 |
Washer-dryer combo shows E18 and stops; often associated with unbalanced load or spin safety.
|
Unbalanced Load / Spin Protection | View Details |
| E19 |
Washer-dryer combo displays E19 and may not respond to control inputs.
|
EEPROM / Program Memory Error | View Details |
| E20 |
Washer-dryer combo shows E20 and stops; may be related to motor or inverter on certain models.
|
Inverter Motor Drive Error | View Details |
| – |
Washer-dryer combo displays incorrect water temperature (too hot or too cold) compared to program setting, without an error code.
|
Temperature Regulation Drift | View Details |
| – |
Washer-dryer combo does not dry clothes effectively; clothes remain damp after full drying program, no code shown.
|
Poor Drying Performance | View Details |
| – |
Washer-dryer combo does not start at all; no lights or display, and no error code.
|
No Power / Mains Supply Fault | View Details |
| – |
Washer-dryer combo door glass becomes excessively hot during drying, more than usual.
|
Dryer Temperature Regulation Fault | View Details |
| – |
Washer-dryer combo door will not open at end of cycle, but no error code is shown.
|
Door Lock Stuck Closed | View Details |
| – |
Washer-dryer combo drum does not turn during drying, though it may turn during washing.
|
Dryer Drive / Direction Control Fault | View Details |
| – |
Washer-dryer combo emits a high-pitched squeal or grinding noise when spinning or tumbling.
|
Drum Bearing or Drive Belt Noise | View Details |
| – |
Washer-dryer combo has a strong musty or mouldy smell inside the drum and on clothes.
|
Biofilm / Mould Build-up in Tub and Hoses | View Details |
| – |
Washer-dryer combo leaks from the rear or underneath during drain or spin, with no error code.
|
Drain Hose or Pump Leak | View Details |
| – |
Washer-dryer combo leaks water from the front, especially during wash or rinse, but no error code is displayed.
|
Door Seal (Gasket) Leak | View Details |
| – |
Washer-dryer combo leaves clothes very wet at the end of the cycle, but no error code is shown.
|
Poor Spin Performance | View Details |
| – |
Washer-dryer combo leaves detergent residues or white streaks on clothes after washing.
|
Poor Rinsing / Detergent Dispensing Issue | View Details |
| – |
Washer-dryer combo makes loud banging or knocking noises during spin, but completes the cycle.
|
Suspension / Shock Absorber Wear | View Details |
| – |
Washer-dryer combo occasionally trips the RCD or GFCI during operation, with no specific error code.
|
Intermittent Earth Leakage | View Details |
| – |
Washer-dryer combo powers on but will not start a cycle; start button unresponsive and no code shown.
|
User Interface / Control Panel Fault | View Details |
| – |
Washer-dryer combo stops during drying and the cabinet feels very hot, but no error code is displayed.
|
Dryer Overheating / Thermostat Cycling | View Details |
| – |
Washer-dryer combo takes excessively long to complete cycles, with no error code.
|
Extended Cycle Time / Heating or Drain Inefficiency | View Details |
| – |
Washer-dryer combo vibrates excessively and walks across the floor during spin.
|
Excessive Vibration / Installation Issue | View Details |
No matching codes found
Advertisements