Stoves User Interface / Control Panel Fault

Washer-dryer combo powers on but will not start a cycle; start button unresponsive and no code shown.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Stuck or failed start button, Faulty user interface PCB, Loose ribbon cable to main PCB, Software lock-up

Safety first: Unplug the appliance before removing the control panel.

Step-by-step checks:

Reset control: Unplug for 5–10 minutes, then reconnect and try again.
Check child lock: Ensure any child lock function is disabled according to the manual.
Inspect control panel: Remove the control fascia and check the ribbon cable and connectors. Reseat firmly.
Test buttons: Press each button and feel for a positive click. If the start button feels mushy or does not register, the interface PCB may need replacement.

Medium 3/5

User Interface PCB

Check Price on Amazon

We may earn a commission from links on this page.