E41
Casarte Door Lock Circuit Error

Washer shows E41 and may lock the door but not start the cycle

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Internal failure of door lock microswitch, Broken wiring between door lock and PCB, Faulty main control board input

How to Fix / Troubleshooting

Safety first: Unplug the washer before accessing the door lock wiring.

  • 1. Confirm lock action: Start a cycle and listen for the door lock click. If it locks but E41 appears, the feedback signal may be missing.
  • 2. Access door lock: Remove the front gasket clamp and pull back the gasket to reach the door lock assembly. Check the connector and wiring.
  • 3. Inspect wiring: Look for broken or loose wires between the lock and main PCB. Repair or replace the harness.
  • 4. Replace door lock: If wiring is intact, replace the door lock assembly with a Casarte-compatible part.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Door Lock Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements