Washer displays F01 and will not start a cycle

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Closed water tap, Blocked inlet filter, Faulty inlet valve coil, Low household water pressure

Safety first: Turn off water and unplug the washer before disconnecting hoses.

Verify taps: Ensure the water tap feeding the Hisense washer is fully open.
Clean inlet filters: Remove hoses and clean the mesh filters at the inlet valves as described under E1.
Check pressure: Confirm adequate water pressure at another faucet. If pressure is low, contact a plumber.
Test valve: If F01 persists, test and replace the water inlet valve assembly.

Medium 3/5

Water Inlet Valve Assembly

Check Price on Amazon

We may earn a commission from links on this page.