Washer displays E32; water level does not change as expected during fill or drain.

Safety first: Disconnect power and water supply before working on hoses.

• 1. Verify fill and drain performance: Observe whether the tub fills and drains at normal speed. Address any E1/E4-related issues first.
• 2. Inspect and clear pressure hose: Remove and clean the hose between the tub and sensor. Ensure no kinks or pinches when reinstalled.
• 3. Clean air dome and tub port: Remove detergent residue or lint from the tub port where the hose connects.
• 4. Replace the pressure sensor: If hose and water flow are good but E32 persists, install a new Toshiba water level sensor.