Washer shows E61; heating time too long or water does not reach set temperature within allowed time.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Scaled or weak heating element, Incorrect water level, Faulty NTC sensor, Low supply voltage

Safety first: Unplug the washer and allow it to cool before touching heater components.

1. Run a descaling cycle: Use a washing machine descaler on a hot cycle to remove limescale from the heater and tub.
2. Check water level: Ensure the machine fills to the correct level; resolve any E5/E31 issues first.
3. Test heater and NTC: Measure resistance of the heater and temperature sensor. Replace any component out of specification.
4. Verify supply voltage: Ensure the outlet provides stable voltage within Toshiba's specified range.

Medium 3/5

Tub Heating Element

Check Price on Amazon

We may earn a commission from links on this page.